one line assignment python

How to Write the Python if Statement in one Line

• online practice

Have you ever heard of writing a Python if statement in a single line? Here, we explore multiple ways to do exactly that, including using conditional expressions in Python.

The if statement is one of the most fundamental statements in Python. In this article, we learn how to write the Python if in one line.

The if is a key piece in writing Python code. It allows developers to control the flow and logic of their code based on information received at runtime. However, many Python developers do not know they may reduce the length and complexity of their if statements by writing them in a single line.

For this article, we assume you’re somewhat familiar with Python conditions and comparisons. If not, don’t worry! Our Python Basics Course will get you up to speed in no time. This course is included in the Python Basics Track , a full-fledged Python learning track designed for complete beginners.

We start with a recap on how Python if statements work. Then, we explore some examples of how to write if statements in a single line. Let’s get started!

How the if Statement Works in Python

Let’s start with the basics. An if statement in Python is used to determine whether a condition is True or False . This information can then be used to perform specific actions in the code, essentially controlling its logic during execution.

The structure of the basic if statement is as follows:

The <expression> is the code that evaluates to either True or False . If this code evaluates to True, then the code below (represented by <perform_action> ) executes.

Python uses whitespaces to indicate which lines are controlled by the if statement. The if statement controls all indented lines below it. Typically, the indentation is set to four spaces (read this post if you’re having trouble with the indentation ).

As a simple example, the code below prints a message if and only if the current weather is sunny:

The if statement in Python has two optional components: the elif statement, which executes only if the preceding if/elif statements are False ; and the else statement, which executes only if all of the preceding if/elif statements are False. While we may have as many elif statements as we want, we may only have a single else statement at the very end of the code block.

Here’s the basic structure:

Here’s how our previous example looks after adding elif and else statements. Change the value of the weather variable to see a different message printed:

How to Write a Python if in one Line

Writing an if statement in Python (along with the optional elif and else statements) uses a lot of whitespaces. Some people may find it confusing or tiresome to follow each statement and its corresponding indented lines.

To overcome this, there is a trick many Python developers often overlook: write an if statement in a single line !

Though not the standard, Python does allow us to write an if statement and its associated action in the same line. Here’s the basic structure:

As you can see, not much has changed. We simply need to “pull” the indented line <perform_action> up to the right of the colon character ( : ). It’s that simple!

Let’s check it with a real example. The code below works as it did previously despite the if statement being in a single line. Test it out and see for yourself:

Writing a Python if Statement With Multiple Actions in one Line

That’s all well and good, but what if my if statement has multiple actions under its control? When using the standard indentation, we separate different actions in multiple indented lines as the structure below shows:

Can we do this in a single line? The surprising answer is yes! We use semicolons to separate each action in the same line as if placed in different lines.

Here’s how the structure looks:

And an example of this functionality:

Have you noticed how each call to the print() function appears in its own line? This indicates we have successfully executed multiple actions from a single line. Nice!

By the way, interested in learning more about the print() function? We have an article on the ins and outs of the print() function .

Writing a Full Python if/elif/else Block Using Single Lines

You may have seen this coming, but we can even write elif and else statements each in a single line. To do so, we use the same syntax as writing an if statement in a single line.

Here’s the general structure:

Looks simple, right? Depending on the content of your expressions and actions, you may find this structure easier to read and understand compared to the indented blocks.

Here’s our previous example of a full if/elif/else block, rewritten as single lines:

Using Python Conditional Expressions to Write an if/else Block in one Line

There’s still a final trick to writing a Python if in one line. Conditional expressions in Python (also known as Python ternary operators) can run an if/else block in a single line.

A conditional expression is even more compact! Remember it took at least two lines to write a block containing both if and else statements in our last example.

In contrast, here’s how a conditional expression is structured:

The syntax is somewhat harder to follow at first, but the basic idea is that <expression> is a test. If the test evaluates to True , then <value_if_true> is the result. Otherwise, the expression results in <value_if_false> .

As you can see, conditional expressions always evaluate to a single value in the end. They are not complete replacements for an if/elif/else block. In fact, we cannot have elif statements in them at all. However, they’re most helpful when determining a single value depending on a single condition.

Take a look at the code below, which determines the value of is_baby depending on whether or not the age is below five:

This is the exact use case for a conditional expression! Here’s how we rewrite this if/else block in a single line:

Much simpler!

Go Even Further With Python!

We hope you now know many ways to write a Python if in one line. We’ve reached the end of the article, but don’t stop practicing now!

If you do not know where to go next, read this post on how to get beyond the basics in Python . If you’d rather get technical, we have a post on the best code editors and IDEs for Python . Remember to keep improving!

You may also like

How Do You Write a SELECT Statement in SQL?

What Is a Foreign Key in SQL?

Enumerate and Explain All the Basic Elements of an SQL Query

Multiple assignment in Python: Assign multiple values or the same value to multiple variables

In Python, the = operator is used to assign values to variables.

You can assign values to multiple variables in one line.

Assign multiple values to multiple variables

Assign the same value to multiple variables.

You can assign multiple values to multiple variables by separating them with commas , .

You can assign values to more than three variables, and it is also possible to assign values of different data types to those variables.

When only one variable is on the left side, values on the right side are assigned as a tuple to that variable.

If the number of variables on the left does not match the number of values on the right, a ValueError occurs. You can assign the remaining values as a list by prefixing the variable name with * .

For more information on using * and assigning elements of a tuple and list to multiple variables, see the following article.

• Unpack a tuple and list in Python

You can also swap the values of multiple variables in the same way. See the following article for details:

• Swap values ​​in a list or values of variables in Python

You can assign the same value to multiple variables by using = consecutively.

For example, this is useful when initializing multiple variables with the same value.

After assigning the same value, you can assign a different value to one of these variables. As described later, be cautious when assigning mutable objects such as list and dict .

You can apply the same method when assigning the same value to three or more variables.

Be careful when assigning mutable objects such as list and dict .

If you use = consecutively, the same object is assigned to all variables. Therefore, if you change the value of an element or add a new element in one variable, the changes will be reflected in the others as well.

If you want to handle mutable objects separately, you need to assign them individually.

after c = []; d = [] , c and d are guaranteed to refer to two different, unique, newly created empty lists. (Note that c = d = [] assigns the same object to both c and d .) 3. Data model — Python 3.11.3 documentation

You can also use copy() or deepcopy() from the copy module to make shallow and deep copies. See the following article.

• Shallow and deep copy in Python: copy(), deepcopy()

Related Categories

Related articles.

• NumPy: arange() and linspace() to generate evenly spaced values
• Chained comparison (a < x < b) in Python
• pandas: Get first/last n rows of DataFrame with head() and tail()
• pandas: Filter rows/columns by labels with filter()
• Get the filename, directory, extension from a path string in Python
• Sign function in Python (sign/signum/sgn, copysign)
• How to flatten a list of lists in Python
• None in Python
• Create calendar as text, HTML, list in Python
• NumPy: Insert elements, rows, and columns into an array with np.insert()
• Shuffle a list, string, tuple in Python (random.shuffle, sample)
• Add and update an item in a dictionary in Python
• Cartesian product of lists in Python (itertools.product)
• Remove a substring from a string in Python
• pandas: Extract rows that contain specific strings from a DataFrame

One line if statement in Python (ternary conditional operator)

In the real world, there are specific classifications and conditions on every action that occurs around us. A twelve-year-old person is a kid, whereas a thirteen-year-old person is a teenager. If the weather is pleasant, you can make plans for an outing. But if it isn’t, you will have to cancel your plans. These conditions control the coding world as well. You will encounter various coding problems where you will have to print the output based on some conditions.

Luckily, Python has a straightforward command and syntax to solve such kinds of problems. These are called conditional statements. So let’s begin our discussion on conditional statements, their syntax, and their applications.

Basic if Statement (Ternary Operator) 

Many programming languages have a ternary operator , which defines a conditional expression. The most common usage is to make a terse, simple dependent assignment statement. In other words, it offers a one-line code to evaluate the first expression if the condition is true; otherwise, it considers the second expression. Programming languages derived from C usually have the following syntax:

The Python BDFL (creator of Python, Guido van Rossum) rejected it as non-Pythonic since it is hard to understand for people not used to C. Moreover, the colon already has many uses in Python. So, when PEP 308 was approved, Python finally received its shortcut conditional expression:

It first evaluates the condition; if it returns True , the compiler will consider expression1 to give the result, otherwise expression2 . Evaluation is lazy, so only one expression will be executed.

Let's take a look at this example:

Here we have defined the age variable whose value is fifteen. Now we use the if-else command to print if the kid is an adult or not. The condition for being an adult is that the person’s age should be eighteen or greater than that. We have mentioned this condition in the if-else command. Now let’s see what the output is:

As we can see, we have obtained the output as “kid” based on the value of the age variable.

We can chain the ternary operators as well:

Here we have incorporated multiple conditions. This form is the chained form of ternary operators. Let’s check the output:

This command is the same as the program given below : 

The compiler evaluates conditions from left to right, which is easy to double-check with something like the pprint module:

Alternatives To The Ternary Operator

For Python versions lower than 2.5, programmers developed several tricks that somehow emulate the behavior of the ternary conditional operator. They are generally discouraged, but it's good to know how they work: 

These are various ways to impose conditions in your code :

We can see that for various inputs, the same output is obtained for the exact value of the variable.

The problem of such an approach is that both expressions will be evaluated no matter what the condition is. As a workaround, lambdas can help:

We obtain the output as follows :

Another approach is using 'and' or 'or' statements:

Yes, most of the workarounds look ugly. Nevertheless, there are situations when it's better to use 'and' or 'or' logic than the ternary operator. For example, when your condition is the same as one of the expressions, you probably want to avoid evaluating it twice:

Indentations And Blocks

Python is very careful of the syntax of programming statements. We have to maintain proper indentation and blocks while we write composite statements like if-else . The correct indentation syntax of the if-else statement is given as follows:

The statements under 'if' are considered a part of one 'block.' The other statements are not part of the if block and are not considered when statements of 'if' are evaluated.

Python will automatically change the text color if you deviate from this indentation and display an error when you run your code. Let's take an example where we intentionally differ from the proper indentation:

We can see here that Python delivers an error message as: "Expected an indented block ."

Also, note the color of 'print' in line 3. All the other text is green, while 'print' has the color red. The color variation happens because of the abrupt indentation of 'print.'

Now let us correct the indentation :

When we have maintained the indentation of Python, we get the output hassle-free.

The else And elif Clauses

Suppose your ‘ if ’ condition is false and you have an alternative statement ready for execution. Then you can easily use the else clause. Now, suppose you have multiple if conditions and an alternative for each one. Then, you can use the elif clause and specify any number of situations. Now let us take an example for each case :

Use of else clause:

The syntax of the   if-else statement is straightforward and has been used multiple times in this tutorial. Let us take a fundamental problem: There is a football team selection. The most critical condition for a candidate's eligibility is that he should be seventeen years or older. If his age is greater than or equal to seventeen, the output will be " You are eligible." If the boy is younger than seventeen years of age, the result will be " Sorry. You are not eligible."

Now let’s look at the code for this problem :

Let’s run this code and see what the output is :

The program first asks for the user input of age. We first enter the age as sixteen.

Now let us enter the age as eighteen and observe the output.

Thus we can see that the code assesses the input entered("age") and checks the value against the if-else conditions. If the condition is true, the compiler considers the statement under 'if ' and other statements are ignored. If the condition is false, the compiler executes the statement under 'else ,' and all the other statements are ignored.

Use of elif clause :

We use this clause when we have multiple conditions to check before printing the output. The word elif is compact for ‘ else-if .' When we use the elif clause, the else clause is optional. But if we want to use else clause, there has to be only one clause and that too at the end of the program.

Let us take a problem. We ask the user to enter a number between one and seven, and we display the corresponding weekday name. Let's look at the program for this problem.

The above-given code has elif as well as else clause.

Now let’s check the output:

The program first asks for user input of a number. Let’s enter four.

Now, let's check the output for the input value twelve.

Thus, the code works for any user-entered input value.

Conditions dominate every aspect of our real-life situations. To simulate these real-life conditions properly in our virtual world of coding, we, the programmers, need a good grasp on the control statements like if-else . We hope that this article helped you in understanding conditional statements and their syntax in Python. The various problems discussed in this article will help you understand the fundamental concepts of if-else statements and their applications.

About The Author

Anton Caceres

• Python Tips and Tricks

Related Articles

• Introduction to Python Classes (Part 1 of 2)
• How to Sort a List, Tuple or Object (with sorted) in Python
• Best Text Editors for Python development
• Introduction to SQLite in Python
• Introductory Tutorial of Python’s SQLAlchemy

Signup for new content

Thank you for joining our mailing list!

Latest Articles

• Cost-Effective Software Solutions for SaaS and MSP Businesses: How TSplus Fits All Budgets
• Best Windows Activator Tools 2024 Ultimate Guide for Effective Activation
• Ultimate Guide to KMSPico Windows Activator 2024 Tips for Easy Activation and Download
• How Does Python Help in Data Analysis?
• Beyond Basics: Building Web Applications with Python Frameworks
• Data Structure
• csv in python
• logging in python
• Python Counter
• python subprocess
• numpy module
• Python code generators
• python tutorial
• csv file python
• python logging
• Counter class
• Python assert
• numbers_list
• binary search
• Insert Node
• Python tips
• python dictionary
• Python's Built-in CSV Library
• logging APIs
• Constructing Counters
• Matplotlib Plotting
• any() Function
• linear search
• Python tools
• python update
• logging module
• Concatenate Data Frames
• python comments
• Recursion Limit
• Data structures
• installation
• python function
• pandas installation
• Zen of Python
• concatenation
• Echo Client
• NumPy Pad()
• install python
• how to install pandas
• Philosophy of Programming
• concat() function
• Socket State
• Python YAML
• remove a node
• function scope
• Tuple in Python
• pandas groupby
• socket programming
• Python Modulo
• Dictionary Update()
• datastructure
• bubble sort
• find a node
• calling function
• GroupBy method
• Np.Arange()
• Modulo Operator
• Python Or Operator
• Python salaries
• pyenv global
• NumPy arrays
• insertion sort
• in place reversal
• learn python
• python packages
• zeros() function
• Scikit Learn
• HTML Parser
• circular queue
• effiiciency
• python maps
• Num Py Zeros
• Python Lists
• HTML Extraction
• selection sort
• Programming
• install python on windows
• reverse string
• python Code Editors
• pandas.reset_index
• Infinite Numbers in Python
• Python Readlines()
• Programming language
• remove python
• concatenate string
• Code Editors
• reset_index()
• Train Test Split
• Local Testing Server
• Python Input
• priority queue
• web development
• uninstall python
• python string
• code interface
• round numbers
• train_test_split()
• Flask module
• Linked List
• machine learning
• compare string
• pandas dataframes
• arange() method
• Singly Linked List
• python scripts
• learning python
• python bugs
• ZipFunction
• plus equals
• np.linspace
• SQLAlchemy advance

Member-only story

How to Assign Multiple Variables in a Single Line in Python

A guide on assigning multiple variables in a single line in python..

Fatos Morina

Python in Plain English

One of the first things that you learn when you start to program is learning how to declare a variable and assign to it a value.

For example, you are told to assign a string and then print it in a console:

Now, if we want to assign another variable in there, our intuition can be to just add a new line, and assign it there:

There is a quicker way to do those assignments in Python, which you can use especially when you want to assign multiple values.

Here it is:

Written by Fatos Morina

Passionate Software Engineer

Text to speech

One line if without else in Python

This tutorial shows you examples of writing intuitive one line if statements in practice.

1. One line if statement

2. ternary operator syntax without else.

Using a regular if statement has less repetition and easier to read.

3. Shorthand syntax with the and operator

Take your skills to the next level ⚡️.

Python Tutorial

File handling, python modules, python numpy, python pandas, python matplotlib, python scipy, machine learning, python mysql, python mongodb, python reference, module reference, python how to, python examples, python variables - assign multiple values, many values to multiple variables.

Python allows you to assign values to multiple variables in one line:

Note: Make sure the number of variables matches the number of values, or else you will get an error.

One Value to Multiple Variables

And you can assign the same value to multiple variables in one line:

Unpack a Collection

If you have a collection of values in a list, tuple etc. Python allows you to extract the values into variables. This is called unpacking .

Unpack a list:

Learn more about unpacking in our Unpack Tuples Chapter.

Video: Python Variable Names

COLOR PICKER

Contact Sales

If you want to use W3Schools services as an educational institution, team or enterprise, send us an e-mail: [email protected]

Report Error

If you want to report an error, or if you want to make a suggestion, send us an e-mail: [email protected]

Top Tutorials

Top references, top examples, get certified.

Python's Assignment Operator: Write Robust Assignments

Table of Contents

The Assignment Statement Syntax

The assignment operator, assignments and variables, other assignment syntax, initializing and updating variables, making multiple variables refer to the same object, updating lists through indices and slices, adding and updating dictionary keys, doing parallel assignments, unpacking iterables, providing default argument values, augmented mathematical assignment operators, augmented assignments for concatenation and repetition, augmented bitwise assignment operators, annotated assignment statements, assignment expressions with the walrus operator, managed attribute assignments, define or call a function, work with classes, import modules and objects, use a decorator, access the control variable in a for loop or a comprehension, use the as keyword, access the _ special variable in an interactive session, built-in objects, named constants.

Python’s assignment operators allow you to define assignment statements . This type of statement lets you create, initialize, and update variables throughout your code. Variables are a fundamental cornerstone in every piece of code, and assignment statements give you complete control over variable creation and mutation.

Learning about the Python assignment operator and its use for writing assignment statements will arm you with powerful tools for writing better and more robust Python code.

In this tutorial, you’ll:

• Use Python’s assignment operator to write assignment statements
• Take advantage of augmented assignments in Python
• Explore assignment variants, like assignment expressions and managed attributes
• Become aware of illegal and dangerous assignments in Python

You’ll dive deep into Python’s assignment statements. To get the most out of this tutorial, you should be comfortable with several basic topics, including variables , built-in data types , comprehensions , functions , and Python keywords . Before diving into some of the later sections, you should also be familiar with intermediate topics, such as object-oriented programming , constants , imports , type hints , properties , descriptors , and decorators .

Free Source Code: Click here to download the free assignment operator source code that you’ll use to write assignment statements that allow you to create, initialize, and update variables in your code.

Assignment Statements and the Assignment Operator

One of the most powerful programming language features is the ability to create, access, and mutate variables . In Python, a variable is a name that refers to a concrete value or object, allowing you to reuse that value or object throughout your code.

To create a new variable or to update the value of an existing one in Python, you’ll use an assignment statement . This statement has the following three components:

• A left operand, which must be a variable
• The assignment operator ( = )
• A right operand, which can be a concrete value , an object , or an expression

Here’s how an assignment statement will generally look in Python:

Here, variable represents a generic Python variable, while expression represents any Python object that you can provide as a concrete value—also known as a literal —or an expression that evaluates to a value.

To execute an assignment statement like the above, Python runs the following steps:

• Evaluate the right-hand expression to produce a concrete value or object . This value will live at a specific memory address in your computer.
• Store the object’s memory address in the left-hand variable . This step creates a new variable if the current one doesn’t already exist or updates the value of an existing variable.

The second step shows that variables work differently in Python than in other programming languages. In Python, variables aren’t containers for objects. Python variables point to a value or object through its memory address. They store memory addresses rather than objects.

This behavior difference directly impacts how data moves around in Python, which is always by reference . In most cases, this difference is irrelevant in your day-to-day coding, but it’s still good to know.

The central component of an assignment statement is the assignment operator . This operator is represented by the = symbol, which separates two operands:

• A value or an expression that evaluates to a concrete value

Operators are special symbols that perform mathematical , logical , and bitwise operations in a programming language. The objects (or object) on which an operator operates are called operands .

Unary operators, like the not Boolean operator, operate on a single object or operand, while binary operators act on two. That means the assignment operator is a binary operator.

Note: Like C , Python uses == for equality comparisons and = for assignments. Unlike C, Python doesn’t allow you to accidentally use the assignment operator ( = ) in an equality comparison.

Equality is a symmetrical relationship, and assignment is not. For example, the expression a == 42 is equivalent to 42 == a . In contrast, the statement a = 42 is correct and legal, while 42 = a isn’t allowed. You’ll learn more about illegal assignments later on.

The right-hand operand in an assignment statement can be any Python object, such as a number , list , string , dictionary , or even a user-defined object. It can also be an expression. In the end, expressions always evaluate to concrete objects, which is their return value.

Here are a few examples of assignments in Python:

The first two sample assignments in this code snippet use concrete values, also known as literals , to create and initialize number and greeting . The third example assigns the result of a math expression to the total variable, while the last example uses a Boolean expression.

Note: You can use the built-in id() function to inspect the memory address stored in a given variable.

Here’s a short example of how this function works:

The number in your output represents the memory address stored in number . Through this address, Python can access the content of number , which is the integer 42 in this example.

If you run this code on your computer, then you’ll get a different memory address because this value varies from execution to execution and computer to computer.

Unlike expressions, assignment statements don’t have a return value because their purpose is to make the association between the variable and its value. That’s why the Python interpreter doesn’t issue any output in the above examples.

Now that you know the basics of how to write an assignment statement, it’s time to tackle why you would want to use one.

The assignment statement is the explicit way for you to associate a name with an object in Python. You can use this statement for two main purposes:

• Creating and initializing new variables
• Updating the values of existing variables

When you use a variable name as the left operand in an assignment statement for the first time, you’re creating a new variable. At the same time, you’re initializing the variable to point to the value of the right operand.

On the other hand, when you use an existing variable in a new assignment, you’re updating or mutating the variable’s value. Strictly speaking, every new assignment will make the variable refer to a new value and stop referring to the old one. Python will garbage-collect all the values that are no longer referenced by any existing variable.

Assignment statements not only assign a value to a variable but also determine the data type of the variable at hand. This additional behavior is another important detail to consider in this kind of statement.

Because Python is a dynamically typed language, successive assignments to a given variable can change the variable’s data type. Changing the data type of a variable during a program’s execution is considered bad practice and highly discouraged. It can lead to subtle bugs that can be difficult to track down.

Unlike in math equations, in Python assignments, the left operand must be a variable rather than an expression or a value. For example, the following construct is illegal, and Python flags it as invalid syntax:

In this example, you have expressions on both sides of the = sign, and this isn’t allowed in Python code. The error message suggests that you may be confusing the equality operator with the assignment one, but that’s not the case. You’re really running an invalid assignment.

To correct this construct and convert it into a valid assignment, you’ll have to do something like the following:

In this code snippet, you first import the sqrt() function from the math module. Then you isolate the hypotenuse variable in the original equation by using the sqrt() function. Now your code works correctly.

Now you know what kind of syntax is invalid. But don’t get the idea that assignment statements are rigid and inflexible. In fact, they offer lots of room for customization, as you’ll learn next.

Python’s assignment statements are pretty flexible and versatile. You can write them in several ways, depending on your specific needs and preferences. Here’s a quick summary of the main ways to write assignments in Python:

Up to this point, you’ve mostly learned about the base assignment syntax in the above code snippet. In the following sections, you’ll learn about multiple, parallel, and augmented assignments. You’ll also learn about assignments with iterable unpacking.

Read on to see the assignment statements in action!

Assignment Statements in Action

You’ll find and use assignment statements everywhere in your Python code. They’re a fundamental part of the language, providing an explicit way to create, initialize, and mutate variables.

You can use assignment statements with plain names, like number or counter . You can also use assignments in more complicated scenarios, such as with:

• Qualified attribute names , like user.name
• Indices and slices of mutable sequences, like a_list[i] and a_list[i:j]
• Dictionary keys , like a_dict[key]

This list isn’t exhaustive. However, it gives you some idea of how flexible these statements are. You can even assign multiple values to an equal number of variables in a single line, commonly known as parallel assignment . Additionally, you can simultaneously assign the values in an iterable to a comma-separated group of variables in what’s known as an iterable unpacking operation.

In the following sections, you’ll dive deeper into all these topics and a few other exciting things that you can do with assignment statements in Python.

The most elementary use case of an assignment statement is to create a new variable and initialize it using a particular value or expression:

All these statements create new variables, assigning them initial values or expressions. For an initial value, you should always use the most sensible and least surprising value that you can think of. For example, initializing a counter to something different from 0 may be confusing and unexpected because counters almost always start having counted no objects.

Updating a variable’s current value or state is another common use case of assignment statements. In Python, assigning a new value to an existing variable doesn’t modify the variable’s current value. Instead, it causes the variable to refer to a different value. The previous value will be garbage-collected if no other variable refers to it.

Consider the following examples:

These examples run two consecutive assignments on the same variable. The first one assigns the string "Hello, World!" to a new variable named greeting .

The second assignment updates the value of greeting by reassigning it the "Hi, Pythonistas!" string. In this example, the original value of greeting —the "Hello, World!" string— is lost and garbage-collected. From this point on, you can’t access the old "Hello, World!" string.

Even though running multiple assignments on the same variable during a program’s execution is common practice, you should use this feature with caution. Changing the value of a variable can make your code difficult to read, understand, and debug. To comprehend the code fully, you’ll have to remember all the places where the variable was changed and the sequential order of those changes.

Because assignments also define the data type of their target variables, it’s also possible for your code to accidentally change the type of a given variable at runtime. A change like this can lead to breaking errors, like AttributeError exceptions. Remember that strings don’t have the same methods and attributes as lists or dictionaries, for example.

In Python, you can make several variables reference the same object in a multiple-assignment line. This can be useful when you want to initialize several similar variables using the same initial value:

In this example, you chain two assignment operators in a single line. This way, your two variables refer to the same initial value of 0 . Note how both variables hold the same memory address, so they point to the same instance of 0 .

When it comes to integer variables, Python exhibits a curious behavior. It provides a numeric interval where multiple assignments behave the same as independent assignments. Consider the following examples:

To create n and m , you use independent assignments. Therefore, they should point to different instances of the number 42 . However, both variables hold the same object, which you confirm by comparing their corresponding memory addresses.

Now check what happens when you use a greater initial value:

Now n and m hold different memory addresses, which means they point to different instances of the integer number 300 . In contrast, when you use multiple assignments, both variables refer to the same object. This tiny difference can save you small bits of memory if you frequently initialize integer variables in your code.

The implicit behavior of making independent assignments point to the same integer number is actually an optimization called interning . It consists of globally caching the most commonly used integer values in day-to-day programming.

Under the hood, Python defines a numeric interval in which interning takes place. That’s the interning interval for integer numbers. You can determine this interval using a small script like the following:

This script helps you determine the interning interval by comparing integer numbers from -10 to 500 . If you run the script from your command line, then you’ll get an output like the following:

This output means that if you use a single number between -5 and 256 to initialize several variables in independent statements, then all these variables will point to the same object, which will help you save small bits of memory in your code.

In contrast, if you use a number that falls outside of the interning interval, then your variables will point to different objects instead. Each of these objects will occupy a different memory spot.

You can use the assignment operator to mutate the value stored at a given index in a Python list. The operator also works with list slices . The syntax to write these types of assignment statements is the following:

In the first construct, expression can return any Python object, including another list. In the second construct, expression must return a series of values as a list, tuple, or any other sequence. You’ll get a TypeError if expression returns a single value.

Note: When creating slice objects, you can use up to three arguments. These arguments are start , stop , and step . They define the number that starts the slice, the number at which the slicing must stop retrieving values, and the step between values.

Here’s an example of updating an individual value in a list:

In this example, you update the value at index 2 using an assignment statement. The original number at that index was 7 , and after the assignment, the number is 3 .

Note: Using indices and the assignment operator to update a value in a tuple or a character in a string isn’t possible because tuples and strings are immutable data types in Python.

Their immutability means that you can’t change their items in place :

You can’t use the assignment operator to change individual items in tuples or strings. These data types are immutable and don’t support item assignments.

It’s important to note that you can’t add new values to a list by using indices that don’t exist in the target list:

In this example, you try to add a new value to the end of numbers by using an index that doesn’t exist. This assignment isn’t allowed because there’s no way to guarantee that new indices will be consecutive. If you ever want to add a single value to the end of a list, then use the .append() method.

If you want to update several consecutive values in a list, then you can use slicing and an assignment statement:

In the first example, you update the letters between indices 1 and 3 without including the letter at 3 . The second example updates the letters from index 3 until the end of the list. Note that this slicing appends a new value to the list because the target slice is shorter than the assigned values.

Also note that the new values were provided through a tuple, which means that this type of assignment allows you to use other types of sequences to update your target list.

The third example updates a single value using a slice where both indices are equal. In this example, the assignment inserts a new item into your target list.

In the final example, you use a step of 2 to replace alternating letters with their lowercase counterparts. This slicing starts at index 1 and runs through the whole list, stepping by two items each time.

Updating the value of an existing key or adding new key-value pairs to a dictionary is another common use case of assignment statements. To do these operations, you can use the following syntax:

The first construct helps you update the current value of an existing key, while the second construct allows you to add a new key-value pair to the dictionary.

For example, to update an existing key, you can do something like this:

In this example, you update the current inventory of oranges in your store using an assignment. The left operand is the existing dictionary key, and the right operand is the desired new value.

While you can’t add new values to a list by assignment, dictionaries do allow you to add new key-value pairs using the assignment operator. In the example below, you add a lemon key to inventory :

In this example, you successfully add a new key-value pair to your inventory with 100 units. This addition is possible because dictionaries don’t have consecutive indices but unique keys, which are safe to add by assignment.

The assignment statement does more than assign the result of a single expression to a single variable. It can also cope nicely with assigning multiple values to multiple variables simultaneously in what’s known as a parallel assignment .

Here’s the general syntax for parallel assignments in Python:

Note that the left side of the statement can be either a tuple or a list of variables. Remember that to create a tuple, you just need a series of comma-separated elements. In this case, these elements must be variables.

The right side of the statement must be a sequence or iterable of values or expressions. In any case, the number of elements in the right operand must match the number of variables on the left. Otherwise, you’ll get a ValueError exception.

In the following example, you compute the two solutions of a quadratic equation using a parallel assignment:

In this example, you first import sqrt() from the math module. Then you initialize the equation’s coefficients in a parallel assignment.

The equation’s solution is computed in another parallel assignment. The left operand contains a tuple of two variables, x1 and x2 . The right operand consists of a tuple of expressions that compute the solutions for the equation. Note how each result is assigned to each variable by position.

A classical use case of parallel assignment is to swap values between variables:

The highlighted line does the magic and swaps the values of previous_value and next_value at the same time. Note that in a programming language that doesn’t support this kind of assignment, you’d have to use a temporary variable to produce the same effect:

In this example, instead of using parallel assignment to swap values between variables, you use a new variable to temporarily store the value of previous_value to avoid losing its reference.

For a concrete example of when you’d need to swap values between variables, say you’re learning how to implement the bubble sort algorithm , and you come up with the following function:

In the highlighted line, you use a parallel assignment to swap values in place if the current value is less than the next value in the input list. To dive deeper into the bubble sort algorithm and into sorting algorithms in general, check out Sorting Algorithms in Python .

You can use assignment statements for iterable unpacking in Python. Unpacking an iterable means assigning its values to a series of variables one by one. The iterable must be the right operand in the assignment, while the variables must be the left operand.

Like in parallel assignments, the variables must come as a tuple or list. The number of variables must match the number of values in the iterable. Alternatively, you can use the unpacking operator ( * ) to grab several values in a variable if the number of variables doesn’t match the iterable length.

Here’s the general syntax for iterable unpacking in Python:

Iterable unpacking is a powerful feature that you can use all around your code. It can help you write more readable and concise code. For example, you may find yourself doing something like this:

Whenever you do something like this in your code, go ahead and replace it with a more readable iterable unpacking using a single and elegant assignment, like in the following code snippet:

The numbers list on the right side contains four values. The assignment operator unpacks these values into the four variables on the left side of the statement. The values in numbers get assigned to variables in the same order that they appear in the iterable. The assignment is done by position.

Note: Because Python sets are also iterables, you can use them in an iterable unpacking operation. However, it won’t be clear which value goes to which variable because sets are unordered data structures.

The above example shows the most common form of iterable unpacking in Python. The main condition for the example to work is that the number of variables matches the number of values in the iterable.

What if you don’t know the iterable length upfront? Will the unpacking work? It’ll work if you use the * operator to pack several values into one of your target variables.

For example, say that you want to unpack the first and second values in numbers into two different variables. Additionally, you would like to pack the rest of the values in a single variable conveniently called rest . In this case, you can use the unpacking operator like in the following code:

In this example, first and second hold the first and second values in numbers , respectively. These values are assigned by position. The * operator packs all the remaining values in the input iterable into rest .

The unpacking operator ( * ) can appear at any position in your series of target variables. However, you can only use one instance of the operator:

The iterable unpacking operator works in any position in your list of variables. Note that you can only use one unpacking operator per assignment. Using more than one unpacking operator isn’t allowed and raises a SyntaxError .

Dropping away unwanted values from the iterable is a common use case for the iterable unpacking operator. Consider the following example:

In Python, if you want to signal that a variable won’t be used, then you use an underscore ( _ ) as the variable’s name. In this example, useful holds the only value that you need to use from the input iterable. The _ variable is a placeholder that guarantees that the unpacking works correctly. You won’t use the values that end up in this disposable variable.

Note: In the example above, if your target iterable is a sequence data type, such as a list or tuple, then it’s best to access its last item directly.

To do this, you can use the -1 index:

Using -1 gives you access to the last item of any sequence data type. In contrast, if you’re dealing with iterators , then you won’t be able to use indices. That’s when the *_ syntax comes to your rescue.

The pattern used in the above example comes in handy when you have a function that returns multiple values, and you only need a few of these values in your code. The os.walk() function may provide a good example of this situation.

This function allows you to iterate over the content of a directory recursively. The function returns a generator object that yields three-item tuples. Each tuple contains the following items:

• The path to the current directory as a string
• The names of all the immediate subdirectories as a list of strings
• The names of all the files in the current directory as a list of strings

Now say that you want to iterate over your home directory and list only the files. You can do something like this:

This code will issue a long output depending on the current content of your home directory. Note that you need to provide a string with the path to your user folder for the example to work. The _ placeholder variable will hold the unwanted data.

In contrast, the filenames variable will hold the list of files in the current directory, which is the data that you need. The code will print the list of filenames. Go ahead and give it a try!

The assignment operator also comes in handy when you need to provide default argument values in your functions and methods. Default argument values allow you to define functions that take arguments with sensible defaults. These defaults allow you to call the function with specific values or to simply rely on the defaults.

As an example, consider the following function:

This function takes one argument, called name . This argument has a sensible default value that’ll be used when you call the function without arguments. To provide this sensible default value, you use an assignment.

Note: According to PEP 8 , the style guide for Python code, you shouldn’t use spaces around the assignment operator when providing default argument values in function definitions.

Here’s how the function works:

If you don’t provide a name during the call to greet() , then the function uses the default value provided in the definition. If you provide a name, then the function uses it instead of the default one.

Up to this point, you’ve learned a lot about the Python assignment operator and how to use it for writing different types of assignment statements. In the following sections, you’ll dive into a great feature of assignment statements in Python. You’ll learn about augmented assignments .

Augmented Assignment Operators in Python

Python supports what are known as augmented assignments . An augmented assignment combines the assignment operator with another operator to make the statement more concise. Most Python math and bitwise operators have an augmented assignment variation that looks something like this:

Note that $ isn’t a valid Python operator. In this example, it’s a placeholder for a generic operator. This statement works as follows:

• Evaluate expression to produce a value.
• Run the operation defined by the operator that prefixes the = sign, using the previous value of variable and the return value of expression as operands.
• Assign the resulting value back to variable .

In practice, an augmented assignment like the above is equivalent to the following statement:

As you can conclude, augmented assignments are syntactic sugar . They provide a shorthand notation for a specific and popular kind of assignment.

For example, say that you need to define a counter variable to count some stuff in your code. You can use the += operator to increment counter by 1 using the following code:

In this example, the += operator, known as augmented addition , adds 1 to the previous value in counter each time you run the statement counter += 1 .

It’s important to note that unlike regular assignments, augmented assignments don’t create new variables. They only allow you to update existing variables. If you use an augmented assignment with an undefined variable, then you get a NameError :

Python evaluates the right side of the statement before assigning the resulting value back to the target variable. In this specific example, when Python tries to compute x + 1 , it finds that x isn’t defined.

Great! You now know that an augmented assignment consists of combining the assignment operator with another operator, like a math or bitwise operator. To continue this discussion, you’ll learn which math operators have an augmented variation in Python.

An equation like x = x + b doesn’t make sense in math. But in programming, a statement like x = x + b is perfectly valid and can be extremely useful. It adds b to x and reassigns the result back to x .

As you already learned, Python provides an operator to shorten x = x + b . Yes, the += operator allows you to write x += b instead. Python also offers augmented assignment operators for most math operators. Here’s a summary:

The Example column provides generic examples of how to use the operators in actual code. Note that x must be previously defined for the operators to work correctly. On the other hand, y can be either a concrete value or an expression that returns a value.

Note: The matrix multiplication operator ( @ ) doesn’t support augmented assignments yet.

Consider the following example of matrix multiplication using NumPy arrays:

Note that the exception traceback indicates that the operation isn’t supported yet.

To illustrate how augmented assignment operators work, say that you need to create a function that takes an iterable of numeric values and returns their sum. You can write this function like in the code below:

In this function, you first initialize total to 0 . In each iteration, the loop adds a new number to total using the augmented addition operator ( += ). When the loop terminates, total holds the sum of all the input numbers. Variables like total are known as accumulators . The += operator is typically used to update accumulators.

Note: Computing the sum of a series of numeric values is a common operation in programming. Python provides the built-in sum() function for this specific computation.

Another interesting example of using an augmented assignment is when you need to implement a countdown while loop to reverse an iterable. In this case, you can use the -= operator:

In this example, custom_reversed() is a generator function because it uses yield . Calling the function creates an iterator that yields items from the input iterable in reverse order. To decrement the control variable, index , you use an augmented subtraction statement that subtracts 1 from the variable in every iteration.

Note: Similar to summing the values in an iterable, reversing an iterable is also a common requirement. Python provides the built-in reversed() function for this specific computation, so you don’t have to implement your own. The above example only intends to show the -= operator in action.

Finally, counters are a special type of accumulators that allow you to count objects. Here’s an example of a letter counter:

To create this counter, you use a Python dictionary. The keys store the letters. The values store the counts. Again, to increment the counter, you use an augmented addition.

Counters are so common in programming that Python provides a tool specially designed to facilitate the task of counting. Check out Python’s Counter: The Pythonic Way to Count Objects for a complete guide on how to use this tool.

The += and *= augmented assignment operators also work with sequences , such as lists, tuples, and strings. The += operator performs augmented concatenations , while the *= operator performs augmented repetition .

These operators behave differently with mutable and immutable data types:

Note that the augmented concatenation operator operates on two sequences, while the augmented repetition operator works on a sequence and an integer number.

Consider the following examples and pay attention to the result of calling the id() function:

Mutable sequences like lists support the += augmented assignment operator through the .__iadd__() method, which performs an in-place addition. This method mutates the underlying list, appending new values to its end.

Note: If the left operand is mutable, then x += y may not be completely equivalent to x = x + y . For example, if you do list_1 = list_1 + list_2 instead of list_1 += list_2 above, then you’ll create a new list instead of mutating the existing one. This may be important if other variables refer to the same list.

Immutable sequences, such as tuples and strings, don’t provide an .__iadd__() method. Therefore, augmented concatenations fall back to the .__add__() method, which doesn’t modify the sequence in place but returns a new sequence.

There’s another difference between mutable and immutable sequences when you use them in an augmented concatenation. Consider the following examples:

With mutable sequences, the data to be concatenated can come as a list, tuple, string, or any other iterable. In contrast, with immutable sequences, the data can only come as objects of the same type. You can concatenate tuples to tuples and strings to strings, for example.

Again, the augmented repetition operator works with a sequence on the left side of the operator and an integer on the right side. This integer value represents the number of repetitions to get in the resulting sequence:

When the *= operator operates on a mutable sequence, it falls back to the .__imul__() method, which performs the operation in place, modifying the underlying sequence. In contrast, if *= operates on an immutable sequence, then .__mul__() is called, returning a new sequence of the same type.

Note: Values of n less than 0 are treated as 0 , which returns an empty sequence of the same data type as the target sequence on the left side of the *= operand.

Note that a_list[0] is a_list[3] returns True . This is because the *= operator doesn’t make a copy of the repeated data. It only reflects the data. This behavior can be a source of issues when you use the operator with mutable values.

For example, say that you want to create a list of lists to represent a matrix, and you need to initialize the list with n empty lists, like in the following code:

In this example, you use the *= operator to populate matrix with three empty lists. Now check out what happens when you try to populate the first sublist in matrix :

The appended values are reflected in the three sublists. This happens because the *= operator doesn’t make copies of the data that you want to repeat. It only reflects the data. Therefore, every sublist in matrix points to the same object and memory address.

If you ever need to initialize a list with a bunch of empty sublists, then use a list comprehension :

This time, when you populate the first sublist of matrix , your changes aren’t propagated to the other sublists. This is because all the sublists are different objects that live in different memory addresses.

Bitwise operators also have their augmented versions. The logic behind them is similar to that of the math operators. The following table summarizes the augmented bitwise operators that Python provides:

The augmented bitwise assignment operators perform the intended operation by taking the current value of the left operand as a starting point for the computation. Consider the following example, which uses the & and &= operators:

Programmers who work with high-level languages like Python rarely use bitwise operations in day-to-day coding. However, these types of operations can be useful in some situations.

For example, say that you’re implementing a Unix-style permission system for your users to access a given resource. In this case, you can use the characters "r" for reading, "w" for writing, and "x" for execution permissions, respectively. However, using bit-based permissions could be more memory efficient:

You can assign permissions to your users with the OR bitwise operator or the augmented OR bitwise operator. Finally, you can use the bitwise AND operator to check if a user has a certain permission, as you did in the final two examples.

You’ve learned a lot about augmented assignment operators and statements in this and the previous sections. These operators apply to math, concatenation, repetition, and bitwise operations. Now you’re ready to look at other assignment variants that you can use in your code or find in other developers’ code.

Other Assignment Variants

So far, you’ve learned that Python’s assignment statements and the assignment operator are present in many different scenarios and use cases. Those use cases include variable creation and initialization, parallel assignments, iterable unpacking, augmented assignments, and more.

In the following sections, you’ll learn about a few variants of assignment statements that can be useful in your future coding. You can also find these assignment variants in other developers’ code. So, you should be aware of them and know how they work in practice.

In short, you’ll learn about:

• Annotated assignment statements with type hints
• Assignment expressions with the walrus operator
• Managed attribute assignments with properties and descriptors
• Implicit assignments in Python

These topics will take you through several interesting and useful examples that showcase the power of Python’s assignment statements.

PEP 526 introduced a dedicated syntax for variable annotation back in Python 3.6 . The syntax consists of the variable name followed by a colon ( : ) and the variable type:

Even though these statements declare three variables with their corresponding data types, the variables aren’t actually created or initialized. So, for example, you can’t use any of these variables in an augmented assignment statement:

If you try to use one of the previously declared variables in an augmented assignment, then you get a NameError because the annotation syntax doesn’t define the variable. To actually define it, you need to use an assignment.

The good news is that you can use the variable annotation syntax in an assignment statement with the = operator:

The first statement in this example is what you can call an annotated assignment statement in Python. You may ask yourself why you should use type annotations in this type of assignment if everybody can see that counter holds an integer number. You’re right. In this example, the variable type is unambiguous.

However, imagine what would happen if you found a variable initialization like the following:

What would be the data type of each user in users ? If the initialization of users is far away from the definition of the User class, then there’s no quick way to answer this question. To clarify this ambiguity, you can provide the appropriate type hint for users :

Now you’re clearly communicating that users will hold a list of User instances. Using type hints in assignment statements that initialize variables to empty collection data types—such as lists, tuples, or dictionaries—allows you to provide more context about how your code works. This practice will make your code more explicit and less error-prone.

Up to this point, you’ve learned that regular assignment statements with the = operator don’t have a return value. They just create or update variables. Therefore, you can’t use a regular assignment to assign a value to a variable within the context of an expression.

Python 3.8 changed this by introducing a new type of assignment statement through PEP 572 . This new statement is known as an assignment expression or named expression .

Note: Expressions are a special type of statement in Python. Their distinguishing characteristic is that expressions always have a return value, which isn’t the case with all types of statements.

Unlike regular assignments, assignment expressions have a return value, which is why they’re called expressions in the first place. This return value is automatically assigned to a variable. To write an assignment expression, you must use the walrus operator ( := ), which was named for its resemblance to the eyes and tusks of a walrus lying on its side.

The general syntax of an assignment statement is as follows:

This expression looks like a regular assignment. However, instead of using the assignment operator ( = ), it uses the walrus operator ( := ). For the expression to work correctly, the enclosing parentheses are required in most use cases. However, there are certain situations in which these parentheses are superfluous. Either way, they won’t hurt you.

Assignment expressions come in handy when you want to reuse the result of an expression or part of an expression without using a dedicated assignment to grab this value beforehand.

Note: Assignment expressions with the walrus operator have several practical use cases. They also have a few restrictions. For example, they’re illegal in certain contexts, such as lambda functions, parallel assignments, and augmented assignments.

For a deep dive into this special type of assignment, check out The Walrus Operator: Python’s Assignment Expressions .

A particularly handy use case for assignment expressions is when you need to grab the result of an expression used in the context of a conditional statement. For example, say that you need to write a function to compute the mean of a sample of numeric values. Without the walrus operator, you could do something like this:

In this example, the sample size ( n ) is a value that you need to reuse in two different computations. First, you need to check whether the sample has data points or not. Then you need to use the sample size to compute the mean. To be able to reuse n , you wrote a dedicated assignment statement at the beginning of your function to grab the sample size.

You can avoid this extra step by combining it with the first use of the target value, len(sample) , using an assignment expression like the following:

The assignment expression introduced in the conditional computes the sample size and assigns it to n . This way, you guarantee that you have a reference to the sample size to use in further computations.

Because the assignment expression returns the sample size anyway, the conditional can check whether that size equals 0 or not and then take a certain course of action depending on the result of this check. The return statement computes the sample’s mean and sends the result back to the function caller.

Python provides a few tools that allow you to fine-tune the operations behind the assignment of attributes. The attributes that run implicit operations on assignments are commonly referred to as managed attributes .

Properties are the most commonly used tool for providing managed attributes in your classes. However, you can also use descriptors and, in some cases, the .__setitem__() special method.

To understand what fine-tuning the operation behind an assignment means, say that you need a Point class that only allows numeric values for its coordinates, x and y . To write this class, you must set up a validation mechanism to reject non-numeric values. You can use properties to attach the validation functionality on top of x and y .

Here’s how you can write your class:

In Point , you use properties for the .x and .y coordinates. Each property has a getter and a setter method . The getter method returns the attribute at hand. The setter method runs the input validation using a try … except block and the built-in float() function. Then the method assigns the result to the actual attribute.

Here’s how your class works in practice:

When you use a property-based attribute as the left operand in an assignment statement, Python automatically calls the property’s setter method, running any computation from it.

Because both .x and .y are properties, the input validation runs whenever you assign a value to either attribute. In the first example, the input values are valid numbers and the validation passes. In the final example, "one" isn’t a valid numeric value, so the validation fails.

If you look at your Point class, you’ll note that it follows a repetitive pattern, with the getter and setter methods looking quite similar. To avoid this repetition, you can use a descriptor instead of a property.

A descriptor is a class that implements the descriptor protocol , which consists of four special methods :

• .__get__() runs when you access the attribute represented by the descriptor.
• .__set__() runs when you use the attribute in an assignment statement.
• .__delete__() runs when you use the attribute in a del statement.
• .__set_name__() sets the attribute’s name, creating a name-aware attribute.

Here’s how your code may look if you use a descriptor to represent the coordinates of your Point class:

You’ve removed repetitive code by defining Coordinate as a descriptor that manages the input validation in a single place. Go ahead and run the following code to try out the new implementation of Point :

Great! The class works as expected. Thanks to the Coordinate descriptor, you now have a more concise and non-repetitive version of your original code.

Another way to fine-tune the operations behind an assignment statement is to provide a custom implementation of .__setitem__() in your class. You’ll use this method in classes representing mutable data collections, such as custom list-like or dictionary-like classes.

As an example, say that you need to create a dictionary-like class that stores its keys in lowercase letters:

In this example, you create a dictionary-like class by subclassing UserDict from collections . Your class implements a .__setitem__() method, which takes key and value as arguments. The method uses str.lower() to convert key into lowercase letters before storing it in the underlying dictionary.

Python implicitly calls .__setitem__() every time you use a key as the left operand in an assignment statement. This behavior allows you to tweak how you process the assignment of keys in your custom dictionary.

Implicit Assignments in Python

Python implicitly runs assignments in many different contexts. In most cases, these implicit assignments are part of the language syntax. In other cases, they support specific behaviors.

Whenever you complete an action in the following list, Python runs an implicit assignment for you:

• Define or call a function
• Define or instantiate a class
• Use the current instance , self
• Import modules and objects
• Use a decorator
• Use the control variable in a for loop or a comprehension
• Use the as qualifier in with statements , imports, and try … except blocks
• Access the _ special variable in an interactive session

Behind the scenes, Python performs an assignment in every one of the above situations. In the following subsections, you’ll take a tour of all these situations.

When you define a function, the def keyword implicitly assigns a function object to your function’s name. Here’s an example:

From this point on, the name greet refers to a function object that lives at a given memory address in your computer. You can call the function using its name and a pair of parentheses with appropriate arguments. This way, you can reuse greet() wherever you need it.

If you call your greet() function with fellow as an argument, then Python implicitly assigns the input argument value to the name parameter on the function’s definition. The parameter will hold a reference to the input arguments.

When you define a class with the class keyword, you’re assigning a specific name to a class object . You can later use this name to create instances of that class. Consider the following example:

In this example, the name User holds a reference to a class object, which was defined in __main__.User . Like with a function, when you call the class’s constructor with the appropriate arguments to create an instance, Python assigns the arguments to the parameters defined in the class initializer .

Another example of implicit assignments is the current instance of a class, which in Python is called self by convention. This name implicitly gets a reference to the current object whenever you instantiate a class. Thanks to this implicit assignment, you can access .name and .job from within the class without getting a NameError in your code.

Import statements are another variant of implicit assignments in Python. Through an import statement, you assign a name to a module object, class, function, or any other imported object. This name is then created in your current namespace so that you can access it later in your code:

In this example, you import the sys module object from the standard library and assign it to the sys name, which is now available in your namespace, as you can conclude from the second call to the built-in dir() function.

You also run an implicit assignment when you use a decorator in your code. The decorator syntax is just a shortcut for a formal assignment like the following:

Here, you call decorator() with a function object as an argument. This call will typically add functionality on top of the existing function, func() , and return a function object, which is then reassigned to the func name.

The decorator syntax is syntactic sugar for replacing the previous assignment, which you can now write as follows:

Even though this new code looks pretty different from the above assignment, the code implicitly runs the same steps.

Another situation in which Python automatically runs an implicit assignment is when you use a for loop or a comprehension. In both cases, you can have one or more control variables that you then use in the loop or comprehension body:

The memory address of control_variable changes on each iteration of the loop. This is because Python internally reassigns a new value from the loop iterable to the loop control variable on each cycle.

The same behavior appears in comprehensions:

In the end, comprehensions work like for loops but use a more concise syntax. This comprehension creates a new list of strings that mimic the output from the previous example.

The as keyword in with statements, except clauses, and import statements is another example of an implicit assignment in Python. This time, the assignment isn’t completely implicit because the as keyword provides an explicit way to define the target variable.

In a with statement, the target variable that follows the as keyword will hold a reference to the context manager that you’re working with. As an example, say that you have a hello.txt file with the following content:

You want to open this file and print each of its lines on your screen. In this case, you can use the with statement to open the file using the built-in open() function.

In the example below, you accomplish this. You also add some calls to print() that display information about the target variable defined by the as keyword:

This with statement uses the open() function to open hello.txt . The open() function is a context manager that returns a text file object represented by an io.TextIOWrapper instance.

Since you’ve defined a hello target variable with the as keyword, now that variable holds a reference to the file object itself. You confirm this by printing the object and its memory address. Finally, the for loop iterates over the lines and prints this content to the screen.

When it comes to using the as keyword in the context of an except clause, the target variable will contain an exception object if any exception occurs:

In this example, you run a division that raises a ZeroDivisionError . The as keyword assigns the raised exception to error . Note that when you print the exception object, you get only the message because exceptions have a custom .__str__() method that supports this behavior.

There’s a final detail to remember when using the as specifier in a try … except block like the one in the above example. Once you leave the except block, the target variable goes out of scope , and you can’t use it anymore.

Finally, Python’s import statements also support the as keyword. In this context, you can use as to import objects with a different name:

In these examples, you use the as keyword to import the numpy package with the np name and pandas with the name pd . If you call dir() , then you’ll realize that np and pd are now in your namespace. However, the numpy and pandas names are not.

Using the as keyword in your imports comes in handy when you want to use shorter names for your objects or when you need to use different objects that originally had the same name in your code. It’s also useful when you want to make your imported names non-public using a leading underscore, like in import sys as _sys .

The final implicit assignment that you’ll learn about in this tutorial only occurs when you’re using Python in an interactive session. Every time you run a statement that returns a value, the interpreter stores the result in a special variable denoted by a single underscore character ( _ ).

You can access this special variable as you’d access any other variable:

These examples cover several situations in which Python internally uses the _ variable. The first two examples evaluate expressions. Expressions always have a return value, which is automatically assigned to the _ variable every time.

When it comes to function calls, note that if your function returns a fruitful value, then _ will hold it. In contrast, if your function returns None , then the _ variable will remain untouched.

The next example consists of a regular assignment statement. As you already know, regular assignments don’t return any value, so the _ variable isn’t updated after these statements run. Finally, note that accessing a variable in an interactive session returns the value stored in the target variable. This value is then assigned to the _ variable.

Note that since _ is a regular variable, you can use it in other expressions:

In this example, you first create a list of values. Then you call len() to get the number of values in the list. Python automatically stores this value in the _ variable. Finally, you use _ to compute the mean of your list of values.

Now that you’ve learned about some of the implicit assignments that Python runs under the hood, it’s time to dig into a final assignment-related topic. In the following few sections, you’ll learn about some illegal and dangerous assignments that you should be aware of and avoid in your code.

Illegal and Dangerous Assignments in Python

In Python, you’ll find a few situations in which using assignments is either forbidden or dangerous. You must be aware of these special situations and try to avoid them in your code.

In the following sections, you’ll learn when using assignment statements isn’t allowed in Python. You’ll also learn about some situations in which using assignments should be avoided if you want to keep your code consistent and robust.

You can’t use Python keywords as variable names in assignment statements. This kind of assignment is explicitly forbidden. If you try to use a keyword as a variable name in an assignment, then you get a SyntaxError :

Whenever you try to use a keyword as the left operand in an assignment statement, you get a SyntaxError . Keywords are an intrinsic part of the language and can’t be overridden.

If you ever feel the need to name one of your variables using a Python keyword, then you can append an underscore to the name of your variable:

In this example, you’re using the desired name for your variables. Because you added a final underscore to the names, Python doesn’t recognize them as keywords, so it doesn’t raise an error.

Note: Even though adding an underscore at the end of a name is an officially recommended practice , it can be confusing sometimes. Therefore, try to find an alternative name or use a synonym whenever you find yourself using this convention.

For example, you can write something like this:

In this example, using the name booking_class for your variable is way clearer and more descriptive than using class_ .

You’ll also find that you can use only a few keywords as part of the right operand in an assignment statement. Those keywords will generally define simple statements that return a value or object. These include lambda , and , or , not , True , False , None , in , and is . You can also use the for keyword when it’s part of a comprehension and the if keyword when it’s used as part of a ternary operator .

In an assignment, you can never use a compound statement as the right operand. Compound statements are those that require an indented block, such as for and while loops, conditionals, with statements, try … except blocks, and class or function definitions.

Sometimes, you need to name variables, but the desired or ideal name is already taken and used as a built-in name. If this is your case, think harder and find another name. Don’t shadow the built-in.

Shadowing built-in names can cause hard-to-identify problems in your code. A common example of this issue is using list or dict to name user-defined variables. In this case, you override the corresponding built-in names, which won’t work as expected if you use them later in your code.

Consider the following example:

The exception in this example may sound surprising. How come you can’t use list() to build a list from a call to map() that returns a generator of square numbers?

By using the name list to identify your list of numbers, you shadowed the built-in list name. Now that name points to a list object rather than the built-in class. List objects aren’t callable, so your code no longer works.

In Python, you’ll have nothing that warns against using built-in, standard-library, or even relevant third-party names to identify your own variables. Therefore, you should keep an eye out for this practice. It can be a source of hard-to-debug errors.

In programming, a constant refers to a name associated with a value that never changes during a program’s execution. Unlike other programming languages, Python doesn’t have a dedicated syntax for defining constants. This fact implies that Python doesn’t have constants in the strict sense of the word.

Python only has variables. If you need a constant in Python, then you’ll have to define a variable and guarantee that it won’t change during your code’s execution. To do that, you must avoid using that variable as the left operand in an assignment statement.

To tell other Python programmers that a given variable should be treated as a constant, you must write your variable’s name in capital letters with underscores separating the words. This naming convention has been adopted by the Python community and is a recommendation that you’ll find in the Constants section of PEP 8 .

In the following examples, you define some constants in Python:

The problem with these constants is that they’re actually variables. Nothing prevents you from changing their value during your code’s execution. So, at any time, you can do something like the following:

These assignments modify the value of two of your original constants. Python doesn’t complain about these changes, which can cause issues later in your code. As a Python developer, you must guarantee that named constants in your code remain constant.

The only way to do that is never to use named constants in an assignment statement other than the constant definition.

You’ve learned a lot about Python’s assignment operators and how to use them for writing assignment statements . With this type of statement, you can create, initialize, and update variables according to your needs. Now you have the required skills to fully manage the creation and mutation of variables in your Python code.

In this tutorial, you’ve learned how to:

• Write assignment statements using Python’s assignment operators
• Work with augmented assignments in Python
• Explore assignment variants, like assignment expression and managed attributes
• Identify illegal and dangerous assignments in Python

Learning about the Python assignment operator and how to use it in assignment statements is a fundamental skill in Python. It empowers you to write reliable and effective Python code.

🐍 Python Tricks 💌

Get a short & sweet Python Trick delivered to your inbox every couple of days. No spam ever. Unsubscribe any time. Curated by the Real Python team.

About Leodanis Pozo Ramos

Leodanis is an industrial engineer who loves Python and software development. He's a self-taught Python developer with 6+ years of experience. He's an avid technical writer with a growing number of articles published on Real Python and other sites.

Each tutorial at Real Python is created by a team of developers so that it meets our high quality standards. The team members who worked on this tutorial are:

Master Real-World Python Skills With Unlimited Access to Real Python

Join us and get access to thousands of tutorials, hands-on video courses, and a community of expert Pythonistas:

Join us and get access to thousands of tutorials, hands-on video courses, and a community of expert Pythonistas:

What Do You Think?

What’s your #1 takeaway or favorite thing you learned? How are you going to put your newfound skills to use? Leave a comment below and let us know.

Commenting Tips: The most useful comments are those written with the goal of learning from or helping out other students. Get tips for asking good questions and get answers to common questions in our support portal . Looking for a real-time conversation? Visit the Real Python Community Chat or join the next “Office Hours” Live Q&A Session . Happy Pythoning!

Keep Learning

Related Topics: intermediate best-practices python

Keep reading Real Python by creating a free account or signing in:

Already have an account? Sign-In

Almost there! Complete this form and click the button below to gain instant access:

Python's Assignment Operator: Write Robust Assignments (Source Code)

🔒 No spam. We take your privacy seriously.

How to use python if else in one line with examples

December 31, 2023

How do I write a simple python if else in one line? What are ternary operator in Python? Can we use one liner for complex if and else statements?

In this tutorial I will share different examples to help you understand and learn about usage of ternary operator in one liner if and else condition with Python. Conditional expressions (sometimes called a “ ternary operator ”) have the lowest priority of all Python operations. Programmers coming to Python from C, C++, or Perl sometimes miss the so-called ternary operator ?:. It’s most often used for avoiding a few lines of code and a temporary variable for simple decisions.

I will not go into details of generic ternary operator as this is used across Python for loops and control flow statements. Here we will concentrate on learning python if else in one line using ternary operator

Python if else in one line

The general syntax of single if and else statement in Python is:

Now if we wish to write this in one line using ternary operator, the syntax would be:

In this syntax, first of all the else condition is evaluated.

• If condition returns True then value_when_true is returned
• If condition returns False then value_when_false is returned

Similarly if you had a variable assigned in the general if else block based on the condition

The same can be written in single line:

Here as well, first of all the condition is evaluated.

• if condition returns True then true-expr is assigned to value object
• if condition returns False then false-expr is assigned to value object

For simple cases like this, I find it very nice to be able to express that logic in one line instead of four. Remember, as a coder, you spend much more time reading code than writing it, so Python's conciseness is invaluable.

Some important points to remember:

• You can use a ternary expression in Python, but only for expressions , not for statements
• You cannot use Python if..elif..else block in one line.
• The name " ternary " means there are just 3 parts to the operator: condition , then , and else .
• Although there are hacks to modify if..elif..else block into if..else block and then use it in single line but that can be complex depending upon conditions and should be avoided
• With if-else blocks , only one of the expressions will be executed.
• While it may be tempting to always use ternary expressions to condense your code, realise that you may sacrifice readability if the condition as well as the true and false expressions are very complex.

Python Script Example

This is a simple script where we use comparison operator in our if condition

• First collect user input in the form of integer and store this value into b
• If b is greater than or equal to 0 then return " positive " which will be True condition
• If b returns False i.e. above condition was not success then return " negative "
• The final returned value i.e. either " positive " or " negative " is stored in object a
• Lastly print the value of value a

The multi-line form of this code would be:

Python if..elif..else in one line

Now as I told this earlier, it is not possible to use if..elif..else block in one line using ternary expressions. Although we can hack our way into this but make sure the maximum allowed length of a line in Python is 79 as per PEP-8 Guidelines

We have this if..elif..else block where we return expression based on the condition check:

We can write this if..elif..else block in one-line using this syntax:

In this syntax,

• First of all condition2 is evaluated, if return True then expr2 is returned
• If condition2 returns False then condition1 is evaluated, if return True then expr1 is returned
• If condition1 also returns False then else is executed and expr is returned

As you see, it was easier if we read this in multi-line if..elif..else block while the same becomes hard to understand for beginners.

We can add multiple if else block in this syntax, but we must also adhere to PEP-8 guidelines

Python Script Example-1

In this sample script we collect an integer value from end user and store it in " b ". The order of execution would be:

• If the value of b is less than 0 then " neg " is returned
• If the value of b is greater than 0 then " pos " is returned.
• If both the condition return False , then " zero " is returned

The multi-line form of the code would be:

Output(when if condition is True )

Output(when if condition is False and elif condition is True )

Output(when both if and elif condition are False )

Python script Example-2

We will add some more else blocks in this sample script, the order of the check would be in below sequence :

• Collect user input for value b which will be converted to integer type
• If value of b is equal to 100 then return " equal to 100 ", If this returns False then next if else condition would be executed
• If value of b is equal to 50 then return " equal to 50 ", If this returns False then next if else condition would be executed
• If value of b is equal to 40 then return " equal to 40 ", If this returns False then next if else condition would be executed
• If value of b is greater than 100 then return " greater than 100 ", If this returns False then next go to else block
• Lastly if all the condition return False then return " less than hundred "

The multi-line form of this example would be:

Python nested if..else in one line

We can also use ternary expression to define nested if..else block on one line with Python.

If you have a multi-line code using nested if else block , something like this:

The one line syntax to use this nested if else block in Python would be:

Here, we have added nested if..elif..else inside the else block using ternary expression. The sequence of the check in the following order

• If condition1 returns True then expr1 is returned, if it returns False then next condition is checked
• If condition-m returns True then expr-m is returned, if it returns False then else block with nested if..elif..else is checked
• If condition3 returns True then expr3 is returned, if it returns False then next condition inside the nested block is returned
• If condition-n returns True then expr-n is returned, if it returns False then expr5 is returned from the else condition

In this example I am using nested if else inside the else block of our one liner. The order of execution will be in the provided sequence:

• First of all collect integer value of b from the end user
• If the value of b is equal to 100 then the if condition returns True and " equal to 100 " is returned
• If the value of b is equal to 50 then the elif condition returns True and " equal to 50 " is returned
• If both if and elif condition returns False then the else block is executed where we have nested if and else condition
• Inside the else block , if b is greater than 100 then it returns " greater than 100 " and if it returns False then " less than 100 " is returned

In this tutorial we learned about usage of ternary operator in if else statement to be able to use it in one line. Although Python does not allow if..elif..else statement in one line but we can still break it into if else and then use it in single line form. Similarly we can also use nested if with ternary operator in single line. I shared multiple examples to help you understand the concept of ternary operator with if and else statement of Python programming language

Lastly I hope this tutorial guide on python if else one line was helpful. So, let me know your suggestions and feedback using the comment section.

Deepak Prasad

He is the founder of GoLinuxCloud and brings over a decade of expertise in Linux, Python, Go, Laravel, DevOps, Kubernetes, Git, Shell scripting, OpenShift, AWS, Networking, and Security. With extensive experience, he excels in various domains, from development to DevOps, Networking, and Security, ensuring robust and efficient solutions for diverse projects. You can connect with him on his LinkedIn profile.

Can't find what you're searching for? Let us assist you.

Enter your query below, and we'll provide instant results tailored to your needs.

If my articles on GoLinuxCloud has helped you, kindly consider buying me a coffee as a token of appreciation.

For any other feedbacks or questions you can send mail to [email protected]

Thank You for your support!!

Leave a Comment Cancel reply

Save my name and email in this browser for the next time I comment.

Notify me via e-mail if anyone answers my comment.

We try to offer easy-to-follow guides and tips on various topics such as Linux, Cloud Computing, Programming Languages, Ethical Hacking and much more.

Recent Comments

Popular posts, 7 tools to detect memory leaks with examples, 100+ linux commands cheat sheet & examples, tutorial: beginners guide on linux memory management, top 15 tools to monitor disk io performance with examples, overview on different disk types and disk interface types, 6 ssh authentication methods to secure connection (sshd_config), how to check security updates list & perform linux patch management rhel 6/7/8, 8 ways to prevent brute force ssh attacks in linux (centos/rhel 7).

Privacy Policy

HTML Sitemap

• Module 2: The Essentials of Python »
• Conditional Statements
• View page source

Conditional Statements 

There are reading-comprehension exercises included throughout the text. These are meant to help you put your reading to practice. Solutions for the exercises are included at the bottom of this page.

In this section, we will be introduced to the if , else , and elif statements. These allow you to specify that blocks of code are to be executed only if specified conditions are found to be true, or perhaps alternative code if the condition is found to be false. For example, the following code will square x if it is a negative number, and will cube x if it is a positive number:

Please refer to the “Basic Python Object Types” subsection to recall the basics of the “boolean” type, which represents True and False values. We will extend that discussion by introducing comparison operations and membership-checking, and then expanding on the utility of the built-in bool type.

Comparison Operations 

Comparison statements will evaluate explicitly to either of the boolean-objects: True or False . There are eight comparison operations in Python:

The first six of these operators are familiar from mathematics:

Note that = and == have very different meanings. The former is the assignment operator, and the latter is the equality operator:

Python allows you to chain comparison operators to create “compound” comparisons:

Whereas == checks to see if two objects have the same value, the is operator checks to see if two objects are actually the same object. For example, creating two lists with the same contents produces two distinct lists, that have the same “value”:

Thus the is operator is most commonly used to check if a variable references the None object, or either of the boolean objects:

Use is not to check if two objects are distinct:

bool and Truth Values of Non-Boolean Objects 

Recall that the two boolean objects True and False formally belong to the int type in addition to bool , and are associated with the values 1 and 0 , respectively:

Likewise Python ascribes boolean values to non-boolean objects. For example,the number 0 is associated with False and non-zero numbers are associated with True . The boolean values of built-in objects can be evaluated with the built-in Python command bool :

and non-zero Python integers are associated with True :

The following built-in Python objects evaluate to False via bool :

Zero of any numeric type: 0 , 0.0 , 0j

Any empty sequence, such as an empty string or list: '' , tuple() , [] , numpy.array([])

Empty dictionaries and sets

Thus non-zero numbers and non-empty sequences/collections evaluate to True via bool .

The bool function allows you to evaluate the boolean values ascribed to various non-boolean objects. For instance, bool([]) returns False wherease bool([1, 2]) returns True .

if , else , and elif 

We now introduce the simple, but powerful if , else , and elif conditional statements. This will allow us to create simple branches in our code. For instance, suppose you are writing code for a video game, and you want to update a character’s status based on her/his number of health-points (an integer). The following code is representative of this:

Each if , elif , and else statement must end in a colon character, and the body of each of these statements is delimited by whitespace .

The following pseudo-code demonstrates the general template for conditional statements:

In practice this can look like:

In its simplest form, a conditional statement requires only an if clause. else and elif clauses can only follow an if clause.

Similarly, conditional statements can have an if and an else without an elif :

Conditional statements can also have an if and an elif without an else :

Note that only one code block within a single if-elif-else statement can be executed: either the “if-block” is executed, or an “elif-block” is executed, or the “else-block” is executed. Consecutive if-statements, however, are completely independent of one another, and thus their code blocks can be executed in sequence, if their respective conditional statements resolve to True .

Reading Comprehension: Conditional statements

Assume my_list is a list. Given the following code:

What will happen if my_list is [] ? Will IndexError be raised? What will first_item be?

Assume variable my_file is a string storing a filename, where a period denotes the end of the filename and the beginning of the file-type. Write code that extracts only the filename.

my_file will have at most one period in it. Accommodate cases where my_file does not include a file-type.

"code.py" \(\rightarrow\) "code"

"doc2.pdf" \(\rightarrow\) "doc2"

"hello_world" \(\rightarrow\) "hello_world"

Inline if-else statements 

Python supports a syntax for writing a restricted version of if-else statements in a single line. The following code:

can be written in a single line as:

This is suggestive of the general underlying syntax for inline if-else statements:

The inline if-else statement :

The expression A if <condition> else B returns A if bool(<condition>) evaluates to True , otherwise this expression will return B .

This syntax is highly restricted compared to the full “if-elif-else” expressions - no “elif” statement is permitted by this inline syntax, nor are multi-line code blocks within the if/else clauses.

Inline if-else statements can be used anywhere, not just on the right side of an assignment statement, and can be quite convenient:

We will see this syntax shine when we learn about comprehension statements. That being said, this syntax should be used judiciously. For example, inline if-else statements ought not be used in arithmetic expressions, for therein lies madness:

Short-Circuiting Logical Expressions 

Armed with our newfound understanding of conditional statements, we briefly return to our discussion of Python’s logic expressions to discuss “short-circuiting”. In Python, a logical expression is evaluated from left to right and will return its boolean value as soon as it is unambiguously determined, leaving any remaining portions of the expression unevaluated . That is, the expression may be short-circuited .

For example, consider the fact that an and operation will only return True if both of its arguments evaluate to True . Thus the expression False and <anything> is guaranteed to return False ; furthermore, when executed, this expression will return False without having evaluated bool(<anything>) .

To demonstrate this behavior, consider the following example:

According to our discussion, the pattern False and short-circuits this expression without it ever evaluating bool(1/0) . Reversing the ordering of the arguments makes this clear.

In practice, short-circuiting can be leveraged in order to condense one’s code. Suppose a section of our code is processing a variable x , which may be either a number or a string . Suppose further that we want to process x in a special way if it is an all-uppercased string. The code

is problematic because isupper can only be called once we are sure that x is a string; this code will raise an error if x is a number. We could instead write

but the more elegant and concise way of handling the nestled checking is to leverage our ability to short-circuit logic expressions.

See, that if x is not a string, that isinstance(x, str) will return False ; thus isinstance(x, str) and x.isupper() will short-circuit and return False without ever evaluating bool(x.isupper()) . This is the preferable way to handle this sort of checking. This code is more concise and readable than the equivalent nested if-statements.

Reading Comprehension: short-circuited expressions

Consider the preceding example of short-circuiting, where we want to catch the case where x is an uppercased string. What is the “bug” in the following code? Why does this fail to utilize short-circuiting correctly?

Links to Official Documentation 

Truth testing

Boolean operations

Comparisons

‘if’ statements

Reading Comprehension Exercise Solutions: 

Conditional statements

If my_list is [] , then bool(my_list) will return False , and the code block will be skipped. Thus first_item will be None .

First, check to see if . is even contained in my_file . If it is, find its index-position, and slice the string up to that index. Otherwise, my_file is already the file name.

Short-circuited expressions

fails to account for the fact that expressions are always evaluated from left to right. That is, bool(x.isupper()) will always be evaluated first in this instance and will raise an error if x is not a string. Thus the following isinstance(x, str) statement is useless.

Python If-Else Statement in One Line - Ternary Operator Explained

Single-line conditionals in python here’s when to and when not to use them.

Python isn’t the fastest programming language out there, but boy is it readable and efficient to write. Everyone knows what conditional statements are, but did you know you can write if statements in one line of Python code? As it turns out you can, and you’ll learn all about it today.

After reading, you’ll know everything about Python’s If Else statements in one line. You’ll understand when to use them, and when it’s best to avoid them and stick to conventional conditional statements.

Don’t feel like reading? Watch my video instead:

Want to get hired as a data scientist? Running a data science blog might help:

Can Blogging About Data Science Really Get You Hired as a Data Scientist?

What’s Wrong With the Normal If Statement?

Absolutely nothing. Splitting conditional statements into multiple lines of code has been a convention for ages. Most programming languages require the usage of curly brackets, and hence the single line if statements are not an option. Other languages allow writing only simple conditionals in a single line.

And then there’s Python. Before diving into If Else statements in one line, let’s first make a short recap on regular conditionals.

For example, you can check if a condition is true with the following syntax:

The variable age is less than 18 in this case, so Go home. is printed to the console. You can spice things up by adding an else condition that gets evaluated if the first condition is False :

This time age is greater than 18, so Welcome! gets printed to the console. Finally, you can add one or multiple elif conditions. These are used to capture the in-between cases. For example, you can print something entirely different if age is between 16 (included) and 18 (excluded):

The variable age is 17, which means the condition under elif is True , hence Not sure... is printed to the console.

Pretty basic stuff, so we naturally don’t want to spend so many lines of code writing it. As it turns out, you can use the ternary operator in Python to evaluate conditions in a single line.

Ternary Operator in Python

A ternary operator exists in some programming languages, and it allows you to shorten a simple If-Else block. It takes in 3 or more operands:

• Value if true - A value that’s returned if the condition evaluates to True.
• Condition - A boolean condition that has to be satisfied to return value if true.
• Value if false - A value that’s returned if the condition evaluates to False. In code, it would look like this:

You can even write else-if logic in Python’s ternary operator. In that case, the syntax changes slightly:

I have to admit - it looks a bit abstract when written like this. You’ll see plenty of practical examples starting from the next section.

One-Line If Statement (Without Else)

A single-line if statement just means you’re deleting the new line and indentation. You’re still writing the same code, with the only twist being that it takes one line instead of two.

Note: One-line if statement is only possible if there’s a single line of code following the condition. In any other case, wrap the code that will be executed inside a function.

Here’s how to transform our two-line if statement to a single-line conditional:

As before, age is less than 18 so Go home. gets printed.

What if you want to print three lines instead of one? As said before, the best practice is to wrap the code inside a function:

One-line if statements in Python are pretty boring. The real time and space saving benefit happens when you add an else condition.

You’ll benefit the most from one-line if statements if you add one or multiple else conditions.

One-Line If-Else Statement

Now we can fully leverage the power of Python’s ternary operator. The code snippet below stores Go home. to a new variable outcome if the age is less than 18 or Welcome! otherwise:

As you would guess, Welcome! is printed to the console as age is set to 19. If you want to print multiple lines or handle more complex logic, wrap everything you want to be executed into a function - just as before.

You now have a clear picture of how the ternary operator works on a simple one-line if-else statement. We can add complexity by adding more conditions to the operator.

One-Line If-Elif-Else Statement

Always be careful when writing multiple conditions in a single line of code. The logic will still work if the line is 500 characters long, but it’s near impossible to read and maintain it.

You should be fine with two conditions in one line, as the code is still easy to read. The following example prints Go home. if age is below 16, Not Sure... if age is between 16 (included) and 18 (excluded), and Welcome otherwise:

You’ll see Not sure... printed to the console, since age is set to 17. What previously took us six lines of code now only takes one. Neat improvement, and the code is still easy to read and maintain.

What else can you do with one-line if statements? Well, a lot. We’ll explore single-line conditionals for list operations next.

Example: One-Line Conditionals for List Operations

Applying some logic to a list involves applying the logic to every list item, and hence iterating over the entire list. Before even thinking about a real-world example, let’s see how you can write a conditional statement for every list item in a single line of code.

How to Write IF and FOR in One Line

You’ll need to make two changes to the ternary operator:

Surround the entire line of code with brackets [] Append the list iteration code (for element in array) after the final else Here’s how the generic syntax looks like:

It’s not that hard, but let’s drive the point home with an example. The following code snippet prints + if the current number of a range is greater than 5 and - otherwise. The numbers range from 1 to 10 (included):

Image 1 - If and For in a single line in Python (image by author)

Let’s now go over an additional real-world example.

Example: Did Student Pass the Exam?

To start, we’ll declare a list of students. Each student is a Python dictionary object with two keys: name and test score:

We want to print that the student has passed the exam if the score is 50 points or above. If the score was below 50 points, we want to print that the student has failed the exam.

In traditional Python syntax, we would manually iterate over each student in the list and check if the score is greater than 50:

Image 2 - List iteration with traditional Python syntax (image by author)

The code works, but we need 5 lines to make a simple check and store the results. You can use your newly-acquired knowledge to reduce the amount of code to a single line:

Image 3 - One-line conditional and a loop with Python (image by author)

The results are identical, but we have a much shorter and neater code. It’s just on the boundary of being unreadable, which is often a tradeoff with ternary operators and single-line loops. You often can’t have both readable code and short Python scripts.

Just because you can write a conditional in one line, it doesn’t mean you should. Readability is a priority. Let’s see in which cases you’re better off with traditional if statements.

Be Careful With One-Line Conditionals

Just because code takes less vertical space doesn’t mean it’s easier to read. Now you’ll see the perfect example of that claim.

The below snippet checks a condition for every possible grade (1-5) with a final else condition capturing invalid input. The conditions take 12 lines of code to write, but the entire snippet is extremely readable:

As expected, you’ll see Grade = 1 printed to the console, but that’s not what we’re interested in. We want to translate the above snippet into a one-line if-else statement with the ternary operator.

It’s possible - but the end result is messy and unreadable:

This is an example of an extreme case where you have multiple conditions you have to evaluate. It’s better to stick with the traditional if statements, even though they take more vertical space.

Take home point: A ternary operator with more than two conditions is just a nightmare to write and debug.

And there you have it - everything you need to know about one-line if-else statements in Python. You’ve learned all there is about the ternary operator, and how to write conditionals starting with a single if to five conditions in between.

Remember to keep your code simple. The code that’s easier to read and maintain is a better-written code at the end of the day. Just because you can cram everything into a single line, doesn’t mean you should. You’ll regret it as soon as you need to make some changes.

An even cleaner way to write long conditionals is by using structural pattern matching - a new feature introduced in Python 3.10. It brings the beloved switch statement to Python for extra readability and speed of development.

What do you guys think of one-line if-else statements in Python? Do you use them regularly or have you switched to structural pattern matching? Let me know in the comment section below.

• Data Science
• Trending Now
• Data Structures
• System Design
• Foundational Courses
• Practice Problem
• Machine Learning
• Data Science Using Python
• Web Development
• Web Browser
• Design Patterns
• Software Development
• Product Management
• Programming

Assigning Multiple Variables in One Line in Python

In this video, we will explore how to assign multiple variables in one line in Python. This technique allows for concise and readable code, especially when you need to initialize multiple variables simultaneously. This tutorial is perfect for students, professionals, or anyone interested in enhancing their Python programming skills.

Why Assign Multiple Variables in One Line?

Assigning multiple variables in one line helps to:

• Write more concise and readable code.
• Initialize multiple variables simultaneously.
• Simplify code maintenance and debugging.

Key Concepts

1. Multiple Assignment:

• The ability to assign values to multiple variables in a single line of code.

2. Tuple Unpacking:

• A technique that allows you to assign values from a tuple to multiple variables in one line.

How to Assign Multiple Variables in One Line

1. Basic Multiple Assignment:

• Assign values to multiple variables separated by commas.
• Use tuples to assign multiple variables in a single line.

3. List Unpacking:

• Similar to tuple unpacking, but using lists.

Practical Examples

Example 1: Basic Multiple Assignment

• Assign values to multiple variables in one line.
• Example: a, b, c = 1, 2, 3

Example 2: Tuple Unpacking

• Use tuple unpacking to assign values.
• Example: x, y = (4, 5)

Example 3: List Unpacking

• Use list unpacking to assign values.
• Example: m, n, o = [6, 7, 8]

Practical Applications

Data Initialization:

• Initialize multiple variables with values in one line for cleaner and more concise code.

Function Returns:

• Assign multiple return values from a function call to separate variables in one line.

Swapping Variables:

• Swap values of two variables in one line using tuple unpacking.
• Example: a, b = b, a

if-elif-else statement on one line in Python

Last updated: Apr 9, 2024 Reading time · 4 min

# Table of Contents

• If-Elif-Else statement on one line in Python
• Shorthand if-else statement in Python

# If-Elif-Else statement on one line in Python

Use a nested ternary operator to implement an if-elif-else statement on one line.

The first ternary should check for a condition and if the condition is not met, it should return another ternary that does the job of an elif/else statement.

The ternary operator is very similar to an if/else statement.

The example checks if the name variable is falsy and if it is, the string "James Doe" is returned, otherwise, the name variable is returned.

# Using nested ternaries in Python

To have an inline if-elif-else statement, we have to use a nested ternary.

You can wrap the statement in parentheses to make it more readable.

The first ternary in the example checks if the variable stores a value greater than 100 .

If the condition is met, the number 10 gets returned.

The nested ternary operator checks if the variable is less than 100 .

If the condition is met, the number 20 is returned, otherwise, 0 is returned.

Here is another example.

If the condition isn't met, the else statement runs and the nested ternary checks for another condition.

The nested ternary checks if the variable stores a value of less than 100 and if the condition is met, the string b gets returned. This is the elif statement.

If the condition isn't met, the else statement runs and the string c gets returned.

# The equivalent of the nested ternary in an if-elif-else statement

Here is how we would implement the ternary operator of the example using if/elif/else statements.

Using if-elif-else statements is a bit more readable, but it is also a bit more verbose.

Whether using a nested ternary operator makes your code more readable depends on the complexity of the conditions you are checking for.

Using the shorthand syntax isn't always recommended.

# Shorthand if-else statement in Python

The ternary operator can also be used if you need a shorthand if-else statement.

The ternary operator will return the value to the left if the condition is met, otherwise, the value in the else statement is returned.

The operator in the example checks if variable1 is greater than variable2 .

Here is the same code sample but using the longer form syntax.

# a if condition else b

The syntax of the ternary operator is a if condition else b .

You can also store the result in a variable.

The example checks if the name variable is falsy and if it is the string "bobby hadz" is returned, otherwise the name variable is returned.

I've also written an article on how to check for multiple conditions in an if statement .

# Additional Resources

You can learn more about the related topics by checking out the following tutorials:

• Styling multiline 'if' statements in Python
• Get the first item in a list that matches condition - Python
• Find the index of Elements that meet a condition in Python
• Using f-string for conditional formatting in Python
• Check if all/any elements in List meet condition in Python
• ValueError: Circular reference detected in Python [Solved]
• Process finished with exit code 139 (interrupted by signal 11: SIGSEGV)
• Python argparse: unrecognized arguments error [Solved]
• How to exit an if statement in Python [5 Ways]

Borislav Hadzhiev

Web Developer

Copyright © 2024 Borislav Hadzhiev

Python One Line If Without Else

Crafting beautiful Python one-liners is as much an art as it is a science. In this tutorial, you’ll learn how to compress an if statement without an else branch into a single line of Python code.

Problem : What’s the one-liner equivalent of the simple if statement without an else branch?

Here’s an example:

You may want to (i) print something, (ii) assign a value to a variable, or (iii) append an element to a list if the condition holds.

In this article, I’ll show you four methods of how to accomplish this goal. All four methods are generally applicable—and you can easily customize them to your specific application.

Let’s have a quick overview of the four methods in our interactive code shell:

Exercise : Run the code for both True and False conditions. Are all methods semantically equivalent?

Method 1: One-Liner If Statement

The first is also the most straightforward method: if you want a one-liner without an else statement, just write the if statement in a single line! There are many tricks (like using the semicolon) that help you create one-liner statements. But for an if body with only one statement, it’s just as simple as avoiding the line break.

This method is perfectly valid and you could see it in practice. Yet, I have to mention that it “violates” the PEP8 standard ( multiple statements in a single line ). Therefore, you shouldn’t consider this to be Pythonic code (there are worse things under the sun though).

Method 2: Ternary with Throw-Away Else Branch

Sure, you can also use the ternary operator:

If you need a quick refresher on the ternary operator, check out my detailed blog article. The ternary operator is commonly used to conditionally assign values. But you can also throw away the return value by not assigning the result to any variable. In this case, it doesn’t matter if you use None or any other “dummy” return value as the result of the else branch:

It’s readable, short, and concise and I like this (well, I may be a bit biased as author of the book Python One-Liners ). Sure, people will ask why you didn’t write it in multiple lines. But where is the fun there?

Method 3: Ternary with Default Value for Assignment

If you need to assign a value conditionally to a variable, but you want to do so without an else branch, you can do the following:

If the condition does not hold, the “dummy” value None is assigned to the variable.

Method 4: Short Circuiting

This method I like most. It uses a Python optimization called “short circuiting” for Boolean operators: the logical and operator simply returns the second operand if the first is True . There’s no Boolean conversion of the second operand, it’s just returned as is.

If the first operand is False , the second operand is not even evaluated.

You can use this to conditionally execute the if branch print('hi') or any other code function.

There are two options:

• condition == True : As the first operand is True , the second operand is returned. Thus, the statement print('hi') is executed and the string hi appears on the screen.
• condition == False : As the first operand is False , the second operand is not even evaluated because the result of the logical and operation is False anyway. Thus, the statement print('hi') is never executed.

Where to Go From Here?

Enough theory. Let’s get some practice!

Coders get paid six figures and more because they can solve problems more effectively using machine intelligence and automation.

To become more successful in coding, solve more real problems for real people. That’s how you polish the skills you really need in practice. After all, what’s the use of learning theory that nobody ever needs?

You build high-value coding skills by working on practical coding projects!

Do you want to stop learning with toy projects and focus on practical code projects that earn you money and solve real problems for people?

🚀 If your answer is YES! , consider becoming a Python freelance developer ! It’s the best way of approaching the task of improving your Python skills—even if you are a complete beginner.

If you just want to learn about the freelancing opportunity, feel free to watch my free webinar “How to Build Your High-Income Skill Python” and learn how I grew my coding business online and how you can, too—from the comfort of your own home.

Join the free webinar now!

Email: Web:  Tel.: (281) 2833835  Last updated: 08/22/2024: Lab 1 posted CSCI 43 12 Network Protocols NOTE: When preparing your answers, you are welcome to use any resources, including the text books and the class notes. However, make sure you properly cite the work of other researchers or professionals . Visit  https://sceweb.uhcl.edu/yang/citing.htm  for more information about cited references.  Warning:  Missing or improper cited references in your answers will result in poor scores. Note: You may cite the lectures if your answer comes from the lectures. Note about AI tools: You may use AI tools such as ChatGPT as a starting point while putting together your own answer; however, simply copying the answer produced by ChatGPT (or any AI tool) is considered cheating . Total: 100 points 1.       (10 pts ) Visit the class discussion group in the Canvas. Post a message with your full name as the subject line. In your post, briefly introduce yourself, including your full name, your major, and one or two items that you most desire to learn in this class. Throughout this class, you shall regularly participate in the discussion group to find recent announcements, reminders, and discussions.  2.       suppose john is using his laptop to send a piece of data (d) to mary. below are some assumptions., assumptions:, (a)     the ip of john’s laptop is 281.832.005.123, and its mac address is a4-41-5d-bb-08-c9., (b)    mary’s computer’s ip address is 777.555.123.100, and its mac is b9-5c-d8-66-95-4f., (c)     the ip of the default gateway/router of john’s laptop is 222.333.444.101, and its mac is 11-22-33-44-55-ab-c0., answer the following questions:, 2.1.    (10 pts) how would the layer-3 header (i.e., ip header) be structured hint: show the source address and the destination address., 2.2.    (10 pts) how would the layer-2 header be structured hint: show the source address and the destination address., 2.3.    (10 pts) explain how john’s default router would process the packet sent from john’s computer., 3.       encapsulation vs tunneling in networking:, 3.1.    (10 pts) what does encapsulation mean in networking protocols give two examples of encapsulation in networking protocols., 3.2.    (10 pts) what does tunneling mean in networking protocols give two examples of tunneling protocols., 4.       (10 pts) the sockets abstraction may be implemented as a udp socket or a tcp socket. explain the relative pros and cons of udp sockets and tcp sockets., 5.       both tcp and ip are end-to-end protocols., 5.1.    (10 pts) explain what end-to-end means in networking., 5.2.    (10 pts) in the tcp, an end is identified by an ip address and a port number; however, in the ip, an end is identified by an ip address. explain why., 6.       the default http protocol is stateless ., 6.1.    (5 pts) first, explain what it means that http being stateless., 6.2.    (5 pts) second, give one example mechanism that could help an http server maintain clients’ states.. Go to the Index 1.         2.       Hands-on lab 2.         3.       Hands-on lab You might be using an unsupported or outdated browser. To get the best possible experience please use the latest version of Chrome, Firefox, Safari, or Microsoft Edge to view this website. Best Online Python Bootcamps Best Online Python Bootcamps Of 2024 Updated: Jun 10, 2024, 11:58am If you’re looking to advance your career or make a leap into the tech space, a Python bootcamp online might help you get there. Like JavaScript, Python is an essential language for many entry-level tech jobs . Mastering Python can help you get your foot in the door in a lucrative, rapidly growing field. Compared to traditional college degree programs, bootcamps offer a more affordable way to master tech skills . According to a Forbes Advisor survey of coding bootcamp grads , only 2.2% of respondents reported being unsatisfied with their bootcamps, indicating that the vast majority of bootcamp participants are happy with their experience. Read on to learn about the five best Python bootcamps online. Why You Can Trust Forbes Advisor Education Forbes Advisor’s education editors are committed to producing unbiased rankings and informative articles covering online colleges, tech bootcamps and career paths. Our ranking methodologies use data from the National Center for Education Statistics , education providers, and reputable educational and professional organizations. An advisory board of educators and other subject matter experts reviews and verifies our content to bring you trustworthy, up-to-date information. Advertisers do not influence our rankings or editorial content. 6,290 accredited, nonprofit colleges and universities analyzed nationwide 52 reputable tech bootcamp providers evaluated for our rankings All content is fact-checked and updated on an annual basis Rankings undergo five rounds of fact-checking Only 7.12% of all colleges, universities and bootcamp providers we consider are awarded Our Methodology We ranked seven online bootcamps in the U.S. using 13 data points in the categories of career support, credibility, affordability and student experience. We pulled data for these categories from individual bootcamp providers. Data is accurate as of November 2023. We scored bootcamps based on the following metrics: Career Support Access to career coaching or mentorship Availability of job guarantee Official hiring partners Credibility Council on Integrity in Results Reporting (CIRR) membership status Student outcomes data transparency Pricing transparency Length of time provider has been operating Affordability Upfront cost per week Availability of installment payment plan Availability of delayed payment plan Accepts GI Bill® Student Experience Average time to completion (in hours) Scheduling flexibility We chose the five best bootcamps to display based on those receiving a curved final score of 62% or higher. For the purpose of our rankings, we do not evaluate self-paced bootcamps or bootcamps offered through universities . Find our full list of methodologies here . Best Coding Bootcamps Online Best Data Science Bootcamps Best Java Bootcamps 5 Best UI/UX Design Bootcamps Best Online Data Analytics Bootcamps Key Takeaways Should you enroll in an online python bootcamp, online python bootcamp credibility, how to find the right online python bootcamp for you, paying for an online python bootcamp, frequently asked questions (faqs) about online python bootcamps. It generally takes at least three months of part-time study to master basic Python skills. Python is an essential programming language when applying for jobs in the field. There are both synchronous and asynchronous Python bootcamps available online. Best Python Bootcamp Options Best for synchronous learning : App Academy Full-Time Online Coding Bootcamp Best for part-time students : Le Wagon Data Engineering Bootcamp Best for graduating quickly : Noble Desktop Python Developer Certificate Best for beginners : Coding Nomads Python Web Development Career Track Best for students on a budget : Byte Academy Python Full-Stack Bootcamp Best for synchronous learning App academy full-time online coding bootcamp. Total Upfront Cost Job Guarantee? CIRR Reporting Member? Based in San Francisco, California, App Academy  offers a full-time online coding bootcamp that takes 24 weeks to complete. Students must be online from 8–5 p.m. PT every day, participating in live, synchronous courses. Over 24 weeks, the curriculum covers programming fundamentals, computer science, web development fundamentals, back-end engineering, front-end engineering, Python and the job search. Incoming students have two tries to pass a free introductory JavaScript course, after which they can enroll in the bootcamp. Time Commitment: 24 weeks Bootcamp Enrollment Options: Full-time, part-time Notable Bootcamp Courses: Programming fundamentals, back-end engineering Prerequisites: Intro to JavaScript course Finance Options: Climb Credit loans, income share agreement, deferred tuition Scholarships Available: N/A Best for part-time students Le wagon data engineering bootcamp. Based in Paris, France, Le Wagon  offers a Python-focused, online data engineering bootcamp with both full-time (two months) and part-time (seven months) tracks. The full-time track requires approximately 40 hours of study each week, while the part-time track involves around 16 hours of weekly study. The curriculum includes data engineering 101, database management, data storage and Batch Pipelines, and data at scale. Incoming students must complete 40 hours of prep work, which includes studies in Python, intermediate SQL and GitHub. Time Commitment: Two months (full-time), seven months (part-time) Notable Bootcamp Courses: Data engineering 101, database management Prerequisites: 40 hours of prep work in Python, intermediate SQL, Linux, GitHub, Git Finance Options: Installment plan, future earnings agreement Scholarships Available: Availability varies by location Best for graduating quickly Noble desktop python developer certificate. Headquartered in New York City, Noble Desktop  offers a full-time Python developer certificate that students can complete in three weeks of full-time study. The curriculum comprises 90 hours of study and takes place live and online during weekdays. Students complete a Python programming bootcamp before advancing to a Python web development with Django course. Incoming students must be able to code in HTML and have knowledge of basic CSS. Students can pay upfront or in installments. Time Commitment: Three weeks Bootcamp Enrollment Options: Full-time Notable Bootcamp Courses: Python programming bootcamp, Python web development with Django Prerequisites: Basic HTML and CSS skills Finance Options: Installment plan Best for beginners Coding nomads python web development career track. Headquartered in the Bay Area in California, Coding Nomads  offers an online Python web development career track that delivers coursework asynchronously through pre-recorded lectures. The company recommends part-time learning, and the curriculum consists of 1,190 total hours of work, which students can complete in roughly 14 months by studying 15 to 20 hours per week. A full-time track is also available and usually takes four to six months. Coding Nomads allows students to pay upfront or in installments. Time Commitment: Four to six months (full-time), 14 months (part-time) Bootcamp Enrollment Options: Part-time, full-time Notable Bootcamp Courses: Introduction to Python, procedural Python Prerequisites: N/A Best for students on a budget Byte academy python full-stack bootcamp. Headquartered in New York City, Byte Academy  offers a Python full-stack bootcamp with both full-time and part-time tracks. Both tracks last 24 weeks and involve both synchronous and asynchronous elements, but the part-time option features more flexibility for working professionals. The curriculum includes modules in data structures, algorithms and JavaScript and culminates with a four-week internship. Incoming students must either pass an introduction to Python course or test out of this requirement. Notable Bootcamp Courses: Introduction to Python, data structures Prerequisites: Intro to Python course or test out Finance Options: Income share agreement At surface level, a bootcamp might seem much more appealing than a traditional degree. Coding bootcamps generally cost less than degrees and take less time to complete. They also prepare graduates for new careers in in-demand fields. However, a bootcamp may not be the right choice for all types of students. Despite a perception that most bootcamp students are career changers from non-tech-related fields, our research found that most bootcamp students have some knowledge of computer science and coding before beginning their bootcamps. Those with zero tech experience may feel behind their peers. Likewise, bootcamps are often demanding and time-consuming, making them difficult to juggle with full-time work or other big commitments. And since many bootcamps take place online, you’ll need strong time management skills and self motivation to stay on track during your program. That said, our survey found that only 2.2% of bootcamp graduates were ultimately somewhat or very unsatisfied with their experience. One downside of attending a coding bootcamp is that these programs are far less regulated than the traditional degrees offered at colleges and universities. And much like the tech industry as a whole, the bootcamp space can be volatile. Providers can appear and disappear seemingly overnight, so it’s important to do your homework when choosing a program. The Council on Integrity in Results Reporting (CIRR) can be a good place to start when evaluating the credibility of a potential bootcamp. CIRR uses salary and employment data of bootcamp grads to arrive at an objective measure of student outcomes for participating providers. However, relatively few bootcamp providers report their student outcomes data to CIRR. What Are Your Career Goals? If you want to become a full-stack developer or work in a field that requires knowledge of Python, a bootcamp can be a great way to learn the skills you’ll need. One important consideration when choosing between bootcamps is the required level of knowledge for your desired role. If you just need Python skills , a short certificate might suffice. If you want to become a full-stack developer , a more robust coding bootcamp might be a better option. What’s Your Availability? Some online bootcamps require regular attendance of livestreamed sessions during typical work hours. Others deliver coursework asynchronously. Based on your work schedule and other obligations, choose a bootcamp that fits into your life. What’s Your Budget? Prestigious providers that employ instructors to deliver live, online classes may charge higher tuition rates. If cost is a prohibiting factor, you might consider an asynchronous bootcamp or a provider that offers tiered pricing based on the number of services it provides. Though a Python bootcamp will generally cost less than a full-fledged degree, you might still shell out thousands of dollars to complete your program. Here’s how to decide whether a bootcamp is worth it and, if so, how to fund one. How Much Is a Python Bootcamp? The five Python bootcamps on this page charge between $1,500 and $20,000 for upfront tuition, indicating that tuition varies widely based on providers. Forbes Advisor research found that the median total upfront cost of a coding bootcamp as of November 2023 was $9,500. Upfront Payment An upfront payment is generally the least expensive financing option for bootcamp students. However, this option requires you to pay the total cost of your bootcamp in one lump sum, which can be financially prohibitive for some students. Pay in Installments An installment plan usually requires students to make a payment each month over a set period. This option often costs more over time than it would to pay upfront, as providers generally tack on interest or other fees. However, paying in installments is more manageable for many learners. Income Share Agreement An income share agreement (ISA) lets students enroll in a bootcamp for little or no upfront cost, but once they graduate and get a job, they will have to pay the bootcamp provider a certain percentage of their salary for an agreed-upon period of time. ISAs can lower some of the initial financial barriers for prospective bootcamp students; however, these agreements almost always cost more over time than upfront payments and installment plans. That’s because an ISA requires you to pay a set percentage of your income, regardless of how much you’re making. Be cautious and read all the fine print before agreeing to an ISA. Job Guarantee Some bootcamp providers offer job guarantees , which promise tuition waivers or refunds to students who do not secure qualifying jobs within a set period after graduation. That said, make sure to read any job guarantee’s fine print. Most of them come with strings attached, such as requiring you to apply to a certain number of jobs per week or restricting you to applying within a certain metropolitan area. Loans, Scholarships and Other Aid Federal student aid is generally unavailable for bootcamp participants. However, military students may be able to apply their GI Bill® benefits toward a bootcamp or similar program. You can also pursue scholarships and loans through providers and nonprofit organizations. However, because loans incur interest, you should first explore forms of aid that do not require repayment. Can you learn Python in three months? If you are studying part time and without any prior subject knowledge, it usually takes two to four months to learn the basics of Python . You might need another three to six months to learn advanced Python skills in areas like web development and data science. Is it worth paying for a Python course? This depends on your circumstances. If you feel comfortable self-studying and have plenty of time to learn, you might be able to learn Python on your own. However, many students find that a structured course provides a more comprehensive education. Can you get a job knowing only Python? Based on many current job postings, it is tough to get a job knowing only Python. You might also need to know HTML, CSS and JavaScript. Many of our top-ranked Python bootcamps also cover other entry-level tech skills. What is the best way to learn Python? It depends. For many students, the structure and support of a bootcamp helps them master Python. If you’re particularly independent and disciplined, however, you may be able to learn the language through self-study. Is it realistic to get a job after coding bootcamp? Yes, it is. The entire point of a coding bootcamp is to get a job in the field. Most providers offer career services, and some offer job guarantees. Mikeie Reiland is a writer who has written features for Oxford American, Bitter Southerner, Gravy, and SB Nation, among other publications. He received a James Beard nomination for a feature he wrote in 2023. Stack Overflow for Teams Where developers & technologists share private knowledge with coworkers Advertising & Talent Reach devs & technologists worldwide about your product, service or employer brand OverflowAI GenAI features for Teams OverflowAPI Train & fine-tune LLMs Labs The future of collective knowledge sharing About the company Visit the blog Collectives™ on Stack Overflow Find centralized, trusted content and collaborate around the technologies you use most. Q&A for work Connect and share knowledge within a single location that is structured and easy to search. Get early access and see previews of new features. Assignment to an item of a list in single line for loop I want to make an assignment to an item of a list in a single line for loop. First i have a list, where each list items are dictionary object. Then, i do for loop over each item of the list and compare if 'nodeid' field of dictionary is 106. If yes, i add new field to that dictionary. Code is below. I want to write loop part of the algorithm in a single line similiar as but this method does not work. How can i write this loop in a single line? variable-assignment 4 Your code is perfectly fine for this task. There is no need to try and write a one-liner other than practicing comprehensions. –  Ma0 Commented Dec 22, 2017 at 14:52 1 Perhaps instead of using a list, you could have a dictionary of dictionaries, keyed by nodeid. Then you can easily do K[106]['S'] = [2 , 124, 123 , 3532, 35] . In O(1) time, no less. –  Kevin Commented Dec 22, 2017 at 14:53 4 Answers 4 As I said in the comments writing a one-liner for this task is not the way to go as the amount of readability you lose is massive . But , if driven out of pure curiosity, you could do it this way: the magic here happens with dict(x, **{'S': [2 , 124, 123 , 3532, 35]}) which essentially adds the two dict ionaries together and returns their result. Python 3.5+ 1 this is more elegant than mine. +1 –  Ma0 Commented Dec 22, 2017 at 14:58 You could certainly do it that way if you wanted, like so: The ** is Python's version of an "explode" or unpacking operator, used on a dictionary, described in detail over here . However , it looks like your data wants to be in a dictionary already, considering the nodeid , so why not restructure it like that? This is the benefit of using hash/table data structures: fast and convenient (not to mention, readable) indexing. The location of every element is already known and you don't need to do any sort of iteration over the contained elements unless you have a secondary key criteria. In addition, by using dictionaries, you avoid the cost of reconstructing the entire list, which happens through the use of the list comprehension in the first example given. Note however that you would not have that problem if you used the for loop which you began with, as that would only alter the element once found, and if you break after completing your operations, the loop would finish without incurring any additional costs. if you have a lot of items, writing a one-liner means rebuilding the whole list, which isn't really efficient if you have sparse values to change. In one-line (works with all versions of python >= 2.7): if the id doesn't match, issue the sublist, else build a dictionary with the sublist + the extra element (not using the fancy "dictionary additions" that all python versions don't have) Your Answer Reminder: Answers generated by artificial intelligence tools are not allowed on Stack Overflow. Learn more Sign up or log in Post as a guest. Required, but never shown By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy . Not the answer you're looking for? Browse other questions tagged python list for-loop variable-assignment or ask your own question . The Overflow Blog Ryan Dahl explains why Deno had to evolve with version 2.0 From PHP to JavaScript to Kubernetes: how one backend engineer evolved over time Featured on Meta We've made changes to our Terms of Service & Privacy Policy - July 2024 Bringing clarity to status tag usage on meta sites Feedback requested: How do you use tag hover descriptions for curating and do... What does a new user need in a homepage experience on Stack Overflow? Hot Network Questions How to determine if a set is countable or uncountable? Home water pressure higher than city water pressure? How "the unity of opposites" represents non-duality? 3 Single Phase Full Bridge Rectifiers for 3 Phase Rectification Is it possible for a company to dilute my shares to the point they are insignificant How should I respond to a former student from my old institution asking for a reference? How to add a segment to an Excel radar plot Is it possible to add custom Social Media accounts to contacts in the Contacts app? Does my AC vent air from the room to outside? What prevents applications from misusing private keys? Who gave God the name 'Jealous' as referred to in Exodus 34:14? Prove Principle of Mathematical Induction and Principal of Well-ordering are equivalent. Do linguists have a noun for referring to pieces of commendatory language, as a sort of antonym of 'pejoratives'? Why don't we observe protons deflecting in J.J. Thomson's experiment? Calculate the sum of numbers in a rectangle Does gluing two points prevent simple connectedness? If you get pulled for secondary inspection at immigration, missing flight, will the airline rebook you? Can I repair these deck support posts, or do I need to replace them? What is the difference between an `.iso` OS for a network and an `.iso` OS for CD? In TNG: the Pegasus, why is Geordi in the first meeting with the Admiral? What might cause these striations in this solder joint? How to extract code into library allowing changes without workflow overhead Everyone hates this Key Account Manager, but company won’t act Can a "sharp turn" on a trace with an SMD resistor also present a risk of reflection? 376 IMAGES Python One-Liner: Simplify Your Code With The If Statement Python One-Liner: Simplify Your Code With The If Statement Python Variables with examples A Simple Introduction to List Comprehension in Python How to Write Python IF-ELSE code in one line? what is a assignment in python COMMENTS python If one line code is definitely going to happen for you, Python 3.8 introduces assignment expressions affectionately known as "the walrus operator". someBoolValue and (num := 20) The 20 will be assigned to num if the first boolean expression is True . Assigning multiple variables in one line in Python Python assigns values from right to left. When assigning multiple variables in a single line, different variable names are provided to the left of the assignment operator separated by a comma. The same goes for their respective values except they should be to the right of the assignment operator. While declaring variables in this fashion one ... Python Multiple Assignment Statements In One Line The assignment at line 1 fails because it is trying assign a value to foo[0] but foo is never initialized or defined so it fails. The assignment at line 2 works because foo is first initialized to be [1,2,3] and then foo[0] is assigned [1,2,3] ... Python Variable Assignment on One line. 0. Python Syntax for Assigning Multiple Variables Across ... How to Write the Python if Statement in one Line You may have seen this coming, but we can even write elif and else statements each in a single line. To do so, we use the same syntax as writing an if statement in a single line. Here's the general structure: if <expression_01>: <perform_action_01>. elif <expression_02>: <perform_action_02>. Python One Line Conditional Assignment Method 1: Ternary Operator. The most basic ternary operator x if c else y returns expression x if the Boolean expression c evaluates to True. Otherwise, if the expression c evaluates to False, the ternary operator returns the alternative expression y. <OnTrue> if <Condition> else <OnFalse>. Operand. Multiple assignment in Python: Assign multiple values or the same value None in Python; Create calendar as text, HTML, list in Python; NumPy: Insert elements, rows, and columns into an array with np.insert() Shuffle a list, string, tuple in Python (random.shuffle, sample) Add and update an item in a dictionary in Python; Cartesian product of lists in Python (itertools.product) Remove a substring from a string in Python One line if statement in Python (ternary conditional operator) Many programming languages have a ternary operator, which defines a conditional expression. The most common usage is to make a terse, simple dependent assignment statement. In other words, it offers a one-line code to evaluate the first expression if the condition is true; otherwise, it considers the second expression. Conditional Statements in Python Python is one of a relatively small set of off-side rule languages. ... It is customary to write if <expr> on one line and <statement> indented on the following line like this: Python. if < expr >: < statement > ... A common use of the conditional expression is to select variable assignment. For example, suppose you want to find the larger of ... How to Assign Multiple Variables in a Single Line in Python There is a quicker way to do those assignments in Python, which you can use especially when you want to assign multiple values. Here it is: You can use the same when you also get values returned from methods, as you can see from the following example: One line if without else in Python If your conditional involves an assignment, then you need to use the regular if statement.. Conclusion. This tutorial has shown you examples of writing a one line if without else statement in Python.. In practice, writing a one line if statement is discouraged as it means you're writing at least two statements in one line: the condition and the code to run when that condition is True. Python Variables W3Schools offers free online tutorials, references and exercises in all the major languages of the web. Covering popular subjects like HTML, CSS, JavaScript, Python, SQL, Java, and many, many more. Python's Assignment Operator: Write Robust Assignments To create a new variable or to update the value of an existing one in Python, you'll use an assignment statement. This statement has the following three components: A left operand, which must be a variable. The assignment operator ( =) A right operand, which can be a concrete value, an object, or an expression. How to use python if else in one line with examples The general syntax of single if and else statement in Python is: bash. if condition: value_when_true else: value_when_false. Now if we wish to write this in one line using ternary operator, the syntax would be: bash. value_when_true if condition else value_when_false. In this syntax, first of all the else condition is evaluated. Conditional Statements In its simplest form, a conditional statement requires only an if clause. else and elif clauses can only follow an if clause. # A conditional statement consisting of # an "if"-clause, only. x = -1 if x < 0: x = x ** 2 # x is now 1. Similarly, conditional statements can have an if and an else without an elif: Python If-Else Statement in One Line Before diving into If Else statements in one line, let's first make a short recap on regular conditionals. For example, you can check if a condition is true with the following syntax: age = 16 if age < 18: print('Go home.') The variable age is less than 18 in this case, so Go home. is printed to the console. Multiple Assignment in Python In this video, we will explore how to assign multiple variables in one line in Python. This technique allows for concise and readable code, especially when you need to initialize multiple variables simultaneously. This tutorial is perfect for students, professionals, or anyone interested in enhancing their Python programming skills. if-elif-else statement on one line in Python Use a nested ternary operator to implement an if-elif-else statement on one line. The first ternary should check for a condition and if the condition is not met, it should return another ternary that does the job of an elif/else statement. main.py. my_str = 'bobby hadz'. python That's more specifically a ternary operator expression than an if-then, here's the python syntax. value_when_true if condition else value_when_false Better Example: (thanks Mr. Burns) 'Yes' if fruit == 'Apple' else 'No' Now with assignment and contrast with if syntax. fruit = 'Apple' isApple = True if fruit == 'Apple' else False vs Python One Line If Without Else Method 1: One-Liner If Statement. The first is also the most straightforward method: if you want a one-liner without an else statement, just write the if statement in a single line! There are many tricks (like using the semicolon) that help you create one-liner statements. But for an if body with only one statement, it's just as simple as ... PDF CSE 1321L Assignment 1C: Body Mass Index (BMI) Calculator Body Mass Index (BMI) is a measure of body fat based on height and weight. The formula to calculate BMI is: Write a Python program that prompts the user for their weight in kilograms and height in centimeters. The program should calculate the user's BMI and categorize it into one of four 1. Lab 1. Total: 100 points. 1. (10 pts) Visit the class discussion group in the Canvas. Post a message with your full name as the subject line. In your post, briefly introduce yourself, including your full name, your major, and one or two items that you most desire to learn in this class. Best Online Python Bootcamps Of 2024 Based in Paris, France, Le Wagon offers a Python-focused, online data engineering bootcamp with both full-time (two months) and part-time (seven months) tracks. The full-time track requires ... python 13. I do not incentivise this, but say you're on the command line, you have nothing but Python and you really need a one-liner, you can do this: python -c "$(echo -e "a=True\nif a : print(1)")" Here we're pre-processing \n before evaluating Python code. That's super hacky! Don't write code like this. python 1. I want to make an assignment to an item of a list in a single line for loop. First i have a list, where each list items are dictionary object. Then, i do for loop over each item of the list and compare if 'nodeid' field of dictionary is 106. If yes, i add new field to that dictionary. Code is below. K= [] assignment essay homework paper phd report resume review speech thesis