scientific research paper format template

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Research paper
• Research Paper Format | APA, MLA, & Chicago Templates

Research Paper Format | APA, MLA, & Chicago Templates

Published on November 19, 2022 by Jack Caulfield . Revised on January 20, 2023.

The formatting of a research paper is different depending on which style guide you’re following. In addition to citations , APA, MLA, and Chicago provide format guidelines for things like font choices, page layout, format of headings and the format of the reference page.

Scribbr offers free Microsoft Word templates for the most common formats. Simply download and get started on your paper.

APA |  MLA | Chicago author-date | Chicago notes & bibliography

• Generate an automatic table of contents
• Generate a list of tables and figures
• Ensure consistent paragraph formatting
• Insert page numbering

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

Formatting an apa paper, formatting an mla paper, formatting a chicago paper, frequently asked questions about research paper formatting.

The main guidelines for formatting a paper in APA Style are as follows:

• Use a standard font like 12 pt Times New Roman or 11 pt Arial.
• Set 1 inch page margins.
• Apply double line spacing.
• If submitting for publication, insert a APA running head on every page.
• Indent every new paragraph ½ inch.

Watch the video below for a quick guide to setting up the format in Google Docs.

The image below shows how to format an APA Style title page for a student paper.

Running head

If you are submitting a paper for publication, APA requires you to include a running head on each page. The image below shows you how this should be formatted.

For student papers, no running head is required unless you have been instructed to include one.

APA provides guidelines for formatting up to five levels of heading within your paper. Level 1 headings are the most general, level 5 the most specific.

Reference page

APA Style citation requires (author-date) APA in-text citations throughout the text and an APA Style reference page at the end. The image below shows how the reference page should be formatted.

Note that the format of reference entries is different depending on the source type. You can easily create your citations and reference list using the free APA Citation Generator.

Generate APA citations for free

Don't submit your assignments before you do this

The academic proofreading tool has been trained on 1000s of academic texts. Making it the most accurate and reliable proofreading tool for students. Free citation check included.

Try for free

The main guidelines for writing an MLA style paper are as follows:

• Use an easily readable font like 12 pt Times New Roman.
• Use title case capitalization for headings .

Check out the video below to see how to set up the format in Google Docs.

On the first page of an MLA paper, a heading appears above your title, featuring some key information:

• Your full name
• Your instructor’s or supervisor’s name
• The course name or number
• The due date of the assignment

Page header

A header appears at the top of each page in your paper, including your surname and the page number.

Works Cited page

MLA in-text citations appear wherever you refer to a source in your text. The MLA Works Cited page appears at the end of your text, listing all the sources used. It is formatted as shown below.

You can easily create your MLA citations and save your Works Cited list with the free MLA Citation Generator.

Generate MLA citations for free

The main guidelines for writing a paper in Chicago style (also known as Turabian style) are:

• Use a standard font like 12 pt Times New Roman.
• Use 1 inch margins or larger.
• Place page numbers in the top right or bottom center.

Chicago doesn’t require a title page , but if you want to include one, Turabian (based on Chicago) presents some guidelines. Lay out the title page as shown below.

Bibliography or reference list

Chicago offers two citation styles : author-date citations plus a reference list, or footnote citations plus a bibliography. Choose one style or the other and use it consistently.

The reference list or bibliography appears at the end of the paper. Both styles present this page similarly in terms of formatting, as shown below.

To format a paper in APA Style , follow these guidelines:

• Use a standard font like 12 pt Times New Roman or 11 pt Arial
• Set 1 inch page margins
• Apply double line spacing
• Include a title page
• If submitting for publication, insert a running head on every page
• Indent every new paragraph ½ inch
• Apply APA heading styles
• Cite your sources with APA in-text citations
• List all sources cited on a reference page at the end

The main guidelines for formatting a paper in MLA style are as follows:

• Use an easily readable font like 12 pt Times New Roman
• Include a four-line MLA heading on the first page
• Center the paper’s title
• Use title case capitalization for headings
• Cite your sources with MLA in-text citations
• List all sources cited on a Works Cited page at the end

The main guidelines for formatting a paper in Chicago style are to:

• Use a standard font like 12 pt Times New Roman
• Use 1 inch margins or larger
• Place page numbers in the top right or bottom center
• Cite your sources with author-date citations or Chicago footnotes
• Include a bibliography or reference list

To automatically generate accurate Chicago references, you can use Scribbr’s free Chicago reference generator .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

Caulfield, J. (2023, January 20). Research Paper Format | APA, MLA, & Chicago Templates. Scribbr. Retrieved August 23, 2024, from https://www.scribbr.com/research-paper/research-paper-format/

Is this article helpful?

Jack Caulfield

Other students also liked, apa format for academic papers and essays, mla format for academic papers and essays, chicago style format for papers | requirements & examples, get unlimited documents corrected.

✔ Free APA citation check included ✔ Unlimited document corrections ✔ Specialized in correcting academic texts

• Privacy Policy

Home » Research Paper Format – Types, Examples and Templates

Research Paper Format – Types, Examples and Templates

Table of Contents

Research paper format is an essential aspect of academic writing that plays a crucial role in the communication of research findings . The format of a research paper depends on various factors such as the discipline, style guide, and purpose of the research. It includes guidelines for the structure, citation style, referencing , and other elements of the paper that contribute to its overall presentation and coherence. Adhering to the appropriate research paper format is vital for ensuring that the research is accurately and effectively communicated to the intended audience. In this era of information, it is essential to understand the different research paper formats and their guidelines to communicate research effectively, accurately, and with the required level of detail. This post aims to provide an overview of some of the common research paper formats used in academic writing.

Research Paper Formats

Research Paper Formats are as follows:

• APA (American Psychological Association) format
• MLA (Modern Language Association) format
• Chicago/Turabian style
• IEEE (Institute of Electrical and Electronics Engineers) format
• AMA (American Medical Association) style
• Harvard style
• Vancouver style
• ACS (American Chemical Society) style
• ASA (American Sociological Association) style
• APSA (American Political Science Association) style

APA (American Psychological Association) Format

Here is a general APA format for a research paper:

• Title Page: The title page should include the title of your paper, your name, and your institutional affiliation. It should also include a running head, which is a shortened version of the title, and a page number in the upper right-hand corner.
• Abstract : The abstract is a brief summary of your paper, typically 150-250 words. It should include the purpose of your research, the main findings, and any implications or conclusions that can be drawn.
• Introduction: The introduction should provide background information on your topic, state the purpose of your research, and present your research question or hypothesis. It should also include a brief literature review that discusses previous research on your topic.
• Methods: The methods section should describe the procedures you used to collect and analyze your data. It should include information on the participants, the materials and instruments used, and the statistical analyses performed.
• Results: The results section should present the findings of your research in a clear and concise manner. Use tables and figures to help illustrate your results.
• Discussion : The discussion section should interpret your results and relate them back to your research question or hypothesis. It should also discuss the implications of your findings and any limitations of your study.
• References : The references section should include a list of all sources cited in your paper. Follow APA formatting guidelines for your citations and references.

Some additional tips for formatting your APA research paper:

• Use 12-point Times New Roman font throughout the paper.
• Double-space all text, including the references.
• Use 1-inch margins on all sides of the page.
• Indent the first line of each paragraph by 0.5 inches.
• Use a hanging indent for the references (the first line should be flush with the left margin, and all subsequent lines should be indented).
• Number all pages, including the title page and references page, in the upper right-hand corner.

APA Research Paper Format Template

APA Research Paper Format Template is as follows:

Title Page:

• Title of the paper
• Author’s name
• Institutional affiliation
• A brief summary of the main points of the paper, including the research question, methods, findings, and conclusions. The abstract should be no more than 250 words.

Introduction:

• Background information on the topic of the research paper
• Research question or hypothesis
• Significance of the study
• Overview of the research methods and design
• Brief summary of the main findings
• Participants: description of the sample population, including the number of participants and their characteristics (age, gender, ethnicity, etc.)
• Materials: description of any materials used in the study (e.g., survey questions, experimental apparatus)
• Procedure: detailed description of the steps taken to conduct the study
• Presentation of the findings of the study, including statistical analyses if applicable
• Tables and figures may be included to illustrate the results

Discussion:

• Interpretation of the results in light of the research question and hypothesis
• Implications of the study for the field
• Limitations of the study
• Suggestions for future research

References:

• A list of all sources cited in the paper, in APA format

Formatting guidelines:

• Double-spaced
• 12-point font (Times New Roman or Arial)
• 1-inch margins on all sides
• Page numbers in the top right corner
• Headings and subheadings should be used to organize the paper
• The first line of each paragraph should be indented
• Quotations of 40 or more words should be set off in a block quote with no quotation marks
• In-text citations should include the author’s last name and year of publication (e.g., Smith, 2019)

APA Research Paper Format Example

APA Research Paper Format Example is as follows:

The Effects of Social Media on Mental Health

University of XYZ

This study examines the relationship between social media use and mental health among college students. Data was collected through a survey of 500 students at the University of XYZ. Results suggest that social media use is significantly related to symptoms of depression and anxiety, and that the negative effects of social media are greater among frequent users.

Social media has become an increasingly important aspect of modern life, especially among young adults. While social media can have many positive effects, such as connecting people across distances and sharing information, there is growing concern about its impact on mental health. This study aims to examine the relationship between social media use and mental health among college students.

Participants: Participants were 500 college students at the University of XYZ, recruited through online advertisements and flyers posted on campus. Participants ranged in age from 18 to 25, with a mean age of 20.5 years. The sample was 60% female, 40% male, and 5% identified as non-binary or gender non-conforming.

Data was collected through an online survey administered through Qualtrics. The survey consisted of several measures, including the Patient Health Questionnaire-9 (PHQ-9) for depression symptoms, the Generalized Anxiety Disorder-7 (GAD-7) for anxiety symptoms, and questions about social media use.

Procedure :

Participants were asked to complete the online survey at their convenience. The survey took approximately 20-30 minutes to complete. Data was analyzed using descriptive statistics, correlations, and multiple regression analysis.

Results indicated that social media use was significantly related to symptoms of depression (r = .32, p < .001) and anxiety (r = .29, p < .001). Regression analysis indicated that frequency of social media use was a significant predictor of both depression symptoms (β = .24, p < .001) and anxiety symptoms (β = .20, p < .001), even when controlling for age, gender, and other relevant factors.

The results of this study suggest that social media use is associated with symptoms of depression and anxiety among college students. The negative effects of social media are greater among frequent users. These findings have important implications for mental health professionals and educators, who should consider addressing the potential negative effects of social media use in their work with young adults.

References :

References should be listed in alphabetical order according to the author’s last name. For example:

• Chou, H. T. G., & Edge, N. (2012). “They are happier and having better lives than I am”: The impact of using Facebook on perceptions of others’ lives. Cyberpsychology, Behavior, and Social Networking, 15(2), 117-121.
• Twenge, J. M., Joiner, T. E., Rogers, M. L., & Martin, G. N. (2018). Increases in depressive symptoms, suicide-related outcomes, and suicide rates among U.S. adolescents after 2010 and links to increased new media screen time. Clinical Psychological Science, 6(1), 3-17.

Note: This is just a sample Example do not use this in your assignment.

MLA (Modern Language Association) Format

MLA (Modern Language Association) Format is as follows:

• Page Layout : Use 8.5 x 11-inch white paper, with 1-inch margins on all sides. The font should be 12-point Times New Roman or a similar serif font.
• Heading and Title : The first page of your research paper should include a heading and a title. The heading should include your name, your instructor’s name, the course title, and the date. The title should be centered and in title case (capitalizing the first letter of each important word).
• In-Text Citations : Use parenthetical citations to indicate the source of your information. The citation should include the author’s last name and the page number(s) of the source. For example: (Smith 23).
• Works Cited Page : At the end of your paper, include a Works Cited page that lists all the sources you used in your research. Each entry should include the author’s name, the title of the work, the publication information, and the medium of publication.
• Formatting Quotations : Use double quotation marks for short quotations and block quotations for longer quotations. Indent the entire quotation five spaces from the left margin.
• Formatting the Body : Use a clear and readable font and double-space your text throughout. The first line of each paragraph should be indented one-half inch from the left margin.

MLA Research Paper Template

MLA Research Paper Format Template is as follows:

• Use 8.5 x 11 inch white paper.
• Use a 12-point font, such as Times New Roman.
• Use double-spacing throughout the entire paper, including the title page and works cited page.
• Set the margins to 1 inch on all sides.
• Use page numbers in the upper right corner, beginning with the first page of text.
• Include a centered title for the research paper, using title case (capitalizing the first letter of each important word).
• Include your name, instructor’s name, course name, and date in the upper left corner, double-spaced.

In-Text Citations

• When quoting or paraphrasing information from sources, include an in-text citation within the text of your paper.
• Use the author’s last name and the page number in parentheses at the end of the sentence, before the punctuation mark.
• If the author’s name is mentioned in the sentence, only include the page number in parentheses.

Works Cited Page

• List all sources cited in alphabetical order by the author’s last name.
• Each entry should include the author’s name, title of the work, publication information, and medium of publication.
• Use italics for book and journal titles, and quotation marks for article and chapter titles.
• For online sources, include the date of access and the URL.

Here is an example of how the first page of a research paper in MLA format should look:

Headings and Subheadings

• Use headings and subheadings to organize your paper and make it easier to read.
• Use numerals to number your headings and subheadings (e.g. 1, 2, 3), and capitalize the first letter of each word.
• The main heading should be centered and in boldface type, while subheadings should be left-aligned and in italics.
• Use only one space after each period or punctuation mark.
• Use quotation marks to indicate direct quotes from a source.
• If the quote is more than four lines, format it as a block quote, indented one inch from the left margin and without quotation marks.
• Use ellipses (…) to indicate omitted words from a quote, and brackets ([…]) to indicate added words.

Works Cited Examples

• Book: Last Name, First Name. Title of Book. Publisher, Publication Year.
• Journal Article: Last Name, First Name. “Title of Article.” Title of Journal, volume number, issue number, publication date, page numbers.
• Website: Last Name, First Name. “Title of Webpage.” Title of Website, publication date, URL. Accessed date.

Here is an example of how a works cited entry for a book should look:

Smith, John. The Art of Writing Research Papers. Penguin, 2021.

MLA Research Paper Example

MLA Research Paper Format Example is as follows:

Your Professor’s Name

Course Name and Number

Date (in Day Month Year format)

Word Count (not including title page or Works Cited)

Title: The Impact of Video Games on Aggression Levels

Video games have become a popular form of entertainment among people of all ages. However, the impact of video games on aggression levels has been a subject of debate among scholars and researchers. While some argue that video games promote aggression and violent behavior, others argue that there is no clear link between video games and aggression levels. This research paper aims to explore the impact of video games on aggression levels among young adults.

Background:

The debate on the impact of video games on aggression levels has been ongoing for several years. According to the American Psychological Association, exposure to violent media, including video games, can increase aggression levels in children and adolescents. However, some researchers argue that there is no clear evidence to support this claim. Several studies have been conducted to examine the impact of video games on aggression levels, but the results have been mixed.

Methodology:

This research paper used a quantitative research approach to examine the impact of video games on aggression levels among young adults. A sample of 100 young adults between the ages of 18 and 25 was selected for the study. The participants were asked to complete a questionnaire that measured their aggression levels and their video game habits.

The results of the study showed that there was a significant correlation between video game habits and aggression levels among young adults. The participants who reported playing violent video games for more than 5 hours per week had higher aggression levels than those who played less than 5 hours per week. The study also found that male participants were more likely to play violent video games and had higher aggression levels than female participants.

The findings of this study support the claim that video games can increase aggression levels among young adults. However, it is important to note that the study only examined the impact of video games on aggression levels and did not take into account other factors that may contribute to aggressive behavior. It is also important to note that not all video games promote violence and aggression, and some games may have a positive impact on cognitive and social skills.

Conclusion :

In conclusion, this research paper provides evidence to support the claim that video games can increase aggression levels among young adults. However, it is important to conduct further research to examine the impact of video games on other aspects of behavior and to explore the potential benefits of video games. Parents and educators should be aware of the potential impact of video games on aggression levels and should encourage young adults to engage in a variety of activities that promote cognitive and social skills.

Works Cited:

• American Psychological Association. (2017). Violent Video Games: Myths, Facts, and Unanswered Questions. Retrieved from https://www.apa.org/news/press/releases/2017/08/violent-video-games
• Ferguson, C. J. (2015). Do Angry Birds make for angry children? A meta-analysis of video game influences on children’s and adolescents’ aggression, mental health, prosocial behavior, and academic performance. Perspectives on Psychological Science, 10(5), 646-666.
• Gentile, D. A., Swing, E. L., Lim, C. G., & Khoo, A. (2012). Video game playing, attention problems, and impulsiveness: Evidence of bidirectional causality. Psychology of Popular Media Culture, 1(1), 62-70.
• Greitemeyer, T. (2014). Effects of prosocial video games on prosocial behavior. Journal of Personality and Social Psychology, 106(4), 530-548.

Chicago/Turabian Style

Chicago/Turabian Formate is as follows:

• Margins : Use 1-inch margins on all sides of the paper.
• Font : Use a readable font such as Times New Roman or Arial, and use a 12-point font size.
• Page numbering : Number all pages in the upper right-hand corner, beginning with the first page of text. Use Arabic numerals.
• Title page: Include a title page with the title of the paper, your name, course title and number, instructor’s name, and the date. The title should be centered on the page and in title case (capitalize the first letter of each word).
• Headings: Use headings to organize your paper. The first level of headings should be centered and in boldface or italics. The second level of headings should be left-aligned and in boldface or italics. Use as many levels of headings as necessary to organize your paper.
• In-text citations : Use footnotes or endnotes to cite sources within the text of your paper. The first citation for each source should be a full citation, and subsequent citations can be shortened. Use superscript numbers to indicate footnotes or endnotes.
• Bibliography : Include a bibliography at the end of your paper, listing all sources cited in your paper. The bibliography should be in alphabetical order by the author’s last name, and each entry should include the author’s name, title of the work, publication information, and date of publication.
• Formatting of quotations: Use block quotations for quotations that are longer than four lines. Indent the entire quotation one inch from the left margin, and do not use quotation marks. Single-space the quotation, and double-space between paragraphs.
• Tables and figures: Use tables and figures to present data and illustrations. Number each table and figure sequentially, and provide a brief title for each. Place tables and figures as close as possible to the text that refers to them.
• Spelling and grammar : Use correct spelling and grammar throughout your paper. Proofread carefully for errors.

Chicago/Turabian Research Paper Template

Chicago/Turabian Research Paper Template is as folows:

Title of Paper

Name of Student

Professor’s Name

I. Introduction

A. Background Information

B. Research Question

C. Thesis Statement

II. Literature Review

A. Overview of Existing Literature

B. Analysis of Key Literature

C. Identification of Gaps in Literature

III. Methodology

A. Research Design

B. Data Collection

C. Data Analysis

IV. Results

A. Presentation of Findings

B. Analysis of Findings

C. Discussion of Implications

V. Conclusion

A. Summary of Findings

B. Implications for Future Research

C. Conclusion

VI. References

A. Bibliography

B. In-Text Citations

VII. Appendices (if necessary)

A. Data Tables

C. Additional Supporting Materials

Chicago/Turabian Research Paper Example

Title: The Impact of Social Media on Political Engagement

Name: John Smith

Class: POLS 101

Professor: Dr. Jane Doe

Date: April 8, 2023

I. Introduction:

Social media has become an integral part of our daily lives. People use social media platforms like Facebook, Twitter, and Instagram to connect with friends and family, share their opinions, and stay informed about current events. With the rise of social media, there has been a growing interest in understanding its impact on various aspects of society, including political engagement. In this paper, I will examine the relationship between social media use and political engagement, specifically focusing on how social media influences political participation and political attitudes.

II. Literature Review:

There is a growing body of literature on the impact of social media on political engagement. Some scholars argue that social media has a positive effect on political participation by providing new channels for political communication and mobilization (Delli Carpini & Keeter, 1996; Putnam, 2000). Others, however, suggest that social media can have a negative impact on political engagement by creating filter bubbles that reinforce existing beliefs and discourage political dialogue (Pariser, 2011; Sunstein, 2001).

III. Methodology:

To examine the relationship between social media use and political engagement, I conducted a survey of 500 college students. The survey included questions about social media use, political participation, and political attitudes. The data was analyzed using descriptive statistics and regression analysis.

Iv. Results:

The results of the survey indicate that social media use is positively associated with political participation. Specifically, respondents who reported using social media to discuss politics were more likely to have participated in a political campaign, attended a political rally, or contacted a political representative. Additionally, social media use was found to be associated with more positive attitudes towards political engagement, such as increased trust in government and belief in the effectiveness of political action.

V. Conclusion:

The findings of this study suggest that social media has a positive impact on political engagement, by providing new opportunities for political communication and mobilization. However, there is also a need for caution, as social media can also create filter bubbles that reinforce existing beliefs and discourage political dialogue. Future research should continue to explore the complex relationship between social media and political engagement, and develop strategies to harness the potential benefits of social media while mitigating its potential negative effects.

Vii. References:

• Delli Carpini, M. X., & Keeter, S. (1996). What Americans know about politics and why it matters. Yale University Press.
• Pariser, E. (2011). The filter bubble: What the Internet is hiding from you. Penguin.
• Putnam, R. D. (2000). Bowling alone: The collapse and revival of American community. Simon & Schuster.
• Sunstein, C. R. (2001). Republic.com. Princeton University Press.

IEEE (Institute of Electrical and Electronics Engineers) Format

IEEE (Institute of Electrical and Electronics Engineers) Research Paper Format is as follows:

• Title : A concise and informative title that accurately reflects the content of the paper.
• Abstract : A brief summary of the paper, typically no more than 250 words, that includes the purpose of the study, the methods used, the key findings, and the main conclusions.
• Introduction : An overview of the background, context, and motivation for the research, including a clear statement of the problem being addressed and the objectives of the study.
• Literature review: A critical analysis of the relevant research and scholarship on the topic, including a discussion of any gaps or limitations in the existing literature.
• Methodology : A detailed description of the methods used to collect and analyze data, including any experiments or simulations, data collection instruments or procedures, and statistical analyses.
• Results : A clear and concise presentation of the findings, including any relevant tables, graphs, or figures.
• Discussion : A detailed interpretation of the results, including a comparison of the findings with previous research, a discussion of the implications of the results, and any recommendations for future research.
• Conclusion : A summary of the key findings and main conclusions of the study.
• References : A list of all sources cited in the paper, formatted according to IEEE guidelines.

In addition to these elements, an IEEE research paper should also follow certain formatting guidelines, including using 12-point font, double-spaced text, and numbered headings and subheadings. Additionally, any tables, figures, or equations should be clearly labeled and referenced in the text.

AMA (American Medical Association) Style

AMA (American Medical Association) Style Research Paper Format:

• Title Page: This page includes the title of the paper, the author’s name, institutional affiliation, and any acknowledgments or disclaimers.
• Abstract: The abstract is a brief summary of the paper that outlines the purpose, methods, results, and conclusions of the study. It is typically limited to 250 words or less.
• Introduction: The introduction provides a background of the research problem, defines the research question, and outlines the objectives and hypotheses of the study.
• Methods: The methods section describes the research design, participants, procedures, and instruments used to collect and analyze data.
• Results: The results section presents the findings of the study in a clear and concise manner, using graphs, tables, and charts where appropriate.
• Discussion: The discussion section interprets the results, explains their significance, and relates them to previous research in the field.
• Conclusion: The conclusion summarizes the main points of the paper, discusses the implications of the findings, and suggests future research directions.
• References: The reference list includes all sources cited in the paper, listed in alphabetical order by author’s last name.

In addition to these sections, the AMA format requires that authors follow specific guidelines for citing sources in the text and formatting their references. The AMA style uses a superscript number system for in-text citations and provides specific formats for different types of sources, such as books, journal articles, and websites.

Harvard Style

Harvard Style Research Paper format is as follows:

• Title page: This should include the title of your paper, your name, the name of your institution, and the date of submission.
• Abstract : This is a brief summary of your paper, usually no more than 250 words. It should outline the main points of your research and highlight your findings.
• Introduction : This section should introduce your research topic, provide background information, and outline your research question or thesis statement.
• Literature review: This section should review the relevant literature on your topic, including previous research studies, academic articles, and other sources.
• Methodology : This section should describe the methods you used to conduct your research, including any data collection methods, research instruments, and sampling techniques.
• Results : This section should present your findings in a clear and concise manner, using tables, graphs, and other visual aids if necessary.
• Discussion : This section should interpret your findings and relate them to the broader research question or thesis statement. You should also discuss the implications of your research and suggest areas for future study.
• Conclusion : This section should summarize your main findings and provide a final statement on the significance of your research.
• References : This is a list of all the sources you cited in your paper, presented in alphabetical order by author name. Each citation should include the author’s name, the title of the source, the publication date, and other relevant information.

In addition to these sections, a Harvard Style research paper may also include a table of contents, appendices, and other supplementary materials as needed. It is important to follow the specific formatting guidelines provided by your instructor or academic institution when preparing your research paper in Harvard Style.

Vancouver Style

Vancouver Style Research Paper format is as follows:

The Vancouver citation style is commonly used in the biomedical sciences and is known for its use of numbered references. Here is a basic format for a research paper using the Vancouver citation style:

• Title page: Include the title of your paper, your name, the name of your institution, and the date.
• Abstract : This is a brief summary of your research paper, usually no more than 250 words.
• Introduction : Provide some background information on your topic and state the purpose of your research.
• Methods : Describe the methods you used to conduct your research, including the study design, data collection, and statistical analysis.
• Results : Present your findings in a clear and concise manner, using tables and figures as needed.
• Discussion : Interpret your results and explain their significance. Also, discuss any limitations of your study and suggest directions for future research.
• References : List all of the sources you cited in your paper in numerical order. Each reference should include the author’s name, the title of the article or book, the name of the journal or publisher, the year of publication, and the page numbers.

ACS (American Chemical Society) Style

ACS (American Chemical Society) Style Research Paper format is as follows:

The American Chemical Society (ACS) Style is a citation style commonly used in chemistry and related fields. When formatting a research paper in ACS Style, here are some guidelines to follow:

• Paper Size and Margins : Use standard 8.5″ x 11″ paper with 1-inch margins on all sides.
• Font: Use a 12-point serif font (such as Times New Roman) for the main text. The title should be in bold and a larger font size.
• Title Page : The title page should include the title of the paper, the authors’ names and affiliations, and the date of submission. The title should be centered on the page and written in bold font. The authors’ names should be centered below the title, followed by their affiliations and the date.
• Abstract : The abstract should be a brief summary of the paper, no more than 250 words. It should be on a separate page and include the title of the paper, the authors’ names and affiliations, and the text of the abstract.
• Main Text : The main text should be organized into sections with headings that clearly indicate the content of each section. The introduction should provide background information and state the research question or hypothesis. The methods section should describe the procedures used in the study. The results section should present the findings of the study, and the discussion section should interpret the results and provide conclusions.
• References: Use the ACS Style guide to format the references cited in the paper. In-text citations should be numbered sequentially throughout the text and listed in numerical order at the end of the paper.
• Figures and Tables: Figures and tables should be numbered sequentially and referenced in the text. Each should have a descriptive caption that explains its content. Figures should be submitted in a high-quality electronic format.
• Supporting Information: Additional information such as data, graphs, and videos may be included as supporting information. This should be included in a separate file and referenced in the main text.
• Acknowledgments : Acknowledge any funding sources or individuals who contributed to the research.

ASA (American Sociological Association) Style

ASA (American Sociological Association) Style Research Paper format is as follows:

• Title Page: The title page of an ASA style research paper should include the title of the paper, the author’s name, and the institutional affiliation. The title should be centered and should be in title case (the first letter of each major word should be capitalized).
• Abstract: An abstract is a brief summary of the paper that should appear on a separate page immediately following the title page. The abstract should be no more than 200 words in length and should summarize the main points of the paper.
• Main Body: The main body of the paper should begin on a new page following the abstract page. The paper should be double-spaced, with 1-inch margins on all sides, and should be written in 12-point Times New Roman font. The main body of the paper should include an introduction, a literature review, a methodology section, results, and a discussion.
• References : The reference section should appear on a separate page at the end of the paper. All sources cited in the paper should be listed in alphabetical order by the author’s last name. Each reference should include the author’s name, the title of the work, the publication information, and the date of publication.
• Appendices : Appendices are optional and should only be included if they contain information that is relevant to the study but too lengthy to be included in the main body of the paper. If you include appendices, each one should be labeled with a letter (e.g., Appendix A, Appendix B, etc.) and should be referenced in the main body of the paper.

APSA (American Political Science Association) Style

APSA (American Political Science Association) Style Research Paper format is as follows:

• Title Page: The title page should include the title of the paper, the author’s name, the name of the course or instructor, and the date.
• Abstract : An abstract is typically not required in APSA style papers, but if one is included, it should be brief and summarize the main points of the paper.
• Introduction : The introduction should provide an overview of the research topic, the research question, and the main argument or thesis of the paper.
• Literature Review : The literature review should summarize the existing research on the topic and provide a context for the research question.
• Methods : The methods section should describe the research methods used in the paper, including data collection and analysis.
• Results : The results section should present the findings of the research.
• Discussion : The discussion section should interpret the results and connect them back to the research question and argument.
• Conclusion : The conclusion should summarize the main findings and implications of the research.
• References : The reference list should include all sources cited in the paper, formatted according to APSA style guidelines.

In-text citations in APSA style use parenthetical citation, which includes the author’s last name, publication year, and page number(s) if applicable. For example, (Smith 2010, 25).

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Delimitations in Research – Types, Examples and...

Research Design – Types, Methods and Examples

Context of the Study – Writing Guide and Examples

Research Methodology – Types, Examples and...

Significance of the Study – Examples and Writing...

APA Table of Contents – Format and Example

Free Download

Research Paper Template

The fastest (and smartest) way to craft a research paper that showcases your project and earns you marks. 

Available in Google Doc, Word & PDF format 4.9 star rating, 5000 + downloads

Step-by-step instructions

Tried & tested academic format

Fill-in-the-blanks simplicity

Pro tips, tricks and resources

What It Covers

This template’s structure is based on the tried and trusted best-practice format for academic research papers. Its structure reflects the overall research process, ensuring your paper has a smooth, logical flow from chapter to chapter. Here’s what’s included:

• The title page/cover page
• Abstract (or executive summary)
• Section 1: Introduction 
• Section 2: Literature review 
• Section 3: Methodology
• Section 4: Findings /results
• Section 5: Discussion
• Section 6: Conclusion
• Reference list

Each section is explained in plain, straightforward language , followed by an overview of the key elements that you need to cover within each section. 

You can download a fully editable MS Word File (DOCX format), copy it to your Google Drive or paste the content to any other word processor.

download your copy

100% Free to use. Instant access.

I agree to receive the free template and other useful resources.

Download Now (Instant Access)

FAQs: Research Paper Template

What format is the template (doc, pdf, ppt, etc.).

The research paper template is provided as a Google Doc. You can download it in MS Word format or make a copy to your Google Drive. You’re also welcome to convert it to whatever format works best for you, such as LaTeX or PDF.

What types of research papers can this template be used for?

The template follows the standard best-practice structure for formal academic research papers, so it is suitable for the vast majority of degrees, particularly those within the sciences.

Some universities may have some additional requirements, but these are typically minor, with the core structure remaining the same. Therefore, it’s always a good idea to double-check your university’s requirements before you finalise your structure.

Is this template for an undergrad, Masters or PhD-level research paper?

This template can be used for a research paper at any level of study. It may be slight overkill for an undergraduate-level study, but it certainly won’t be missing anything.

How long should my research paper be?

This depends entirely on your university’s specific requirements, so it’s best to check with them. We include generic word count ranges for each section within the template, but these are purely indicative. 

What about the research proposal?

If you’re still working on your research proposal, we’ve got a template for that here .

We’ve also got loads of proposal-related guides and videos over on the Grad Coach blog .

How do I write a literature review?

We have a wealth of free resources on the Grad Coach Blog that unpack how to write a literature review from scratch. You can check out the literature review section of the blog here.

How do I create a research methodology?

We have a wealth of free resources on the Grad Coach Blog that unpack research methodology, both qualitative and quantitative. You can check out the methodology section of the blog here.

Can I share this research paper template with my friends/colleagues?

Yes, you’re welcome to share this template. If you want to post about it on your blog or social media, all we ask is that you reference this page as your source.

Can Grad Coach help me with my research paper?

Within the template, you’ll find plain-language explanations of each section, which should give you a fair amount of guidance. However, you’re also welcome to consider our private coaching services .

Additional Resources

If you’re working on a research paper or report, be sure to also check these resources out…

1-On-1 Private Coaching

The Grad Coach Resource Center

The Grad Coach YouTube Channel

The Grad Coach Podcast

How to Format a Scientific Paper

#scribendiinc

Written by  Joanna Kimmerly-Smith

You've done the research. You've carefully recorded your lab results and compiled a list of relevant sources. You've even written a draft of your scientific, technical, or medical paper, hoping to get published in a reputable journal. But how do you format your paper to ensure that every detail is correct? If you're a scientific researcher or co-author looking to get your research published, read on to find out how to format your paper.

While it's true that you'll eventually need to tailor your research for your target journal, which will provide specific author guidelines for formatting the paper (see, for example, author guidelines for publications by Elsevier , PLOS ONE , and  mBio ), there are some formatting rules that are useful to know for your initial draft. This article will explore some of the formatting rules that apply to all scientific writing, helping you to follow the correct order of sections ( IMRaD ), understand the requirements of each section, find resources for standard terminology and units of measurement, and prepare your scientific paper for publication.

Format Overview

The four main elements of a scientific paper can be represented by the acronym IMRaD: introduction, methods, results, and discussion. Other sections, along with a suggested length,* are listed in the table below.

* Length guidelines are taken from https://www.elsevier.com/connect/11-steps-to-structuring-a-science-paper-editors-will-take-seriously#step6 .

Now, let's go through the main sections you might have to prepare to format your paper.

On the first page of the paper, you must present the title of the paper along with the authors' names, institutional affiliations, and contact information. The corresponding author(s) (i.e., the one[s] who will be in contact with the reviewers) must be specified, usually with a footnote or an asterisk (*), and their full contact details (e.g., email address and phone number) must be provided. For example:

Dr. Clara A. Bell 1, * and Dr. Scott C. Smith 2

1 University of Areopagitica, Department of Biology, Sometown, Somecountry

2 Leviathan University, Department of Biochemistry and Biomedical Sciences, Sometown, Somecountry

*[email protected]

FORMATTING TIPS:

• If you are unsure of how to classify author roles (i.e., who did what), guidelines are available online. For example, American Geophysical Union (AGU) journals now recommend using Contributor Roles Taxonomy (CRediT), an online taxonomy for author contributions.

In this summary of your research, you must state your subject (i.e., what you did) and encapsulate the main findings and conclusions of your paper.

• Do not add citations in an abstract (the reader might not be able to access your reference list).
• Avoid using acronyms and abbreviations in the abstract, as the reader may not be familiar with them. Use full terms instead.

Below the abstract, include a list of key terms to help other researchers locate your study. Note that "keywords" is one word (with no space) and is followed by a colon:

Keywords : paper format, scientific writing.

• Check whether "Keywords" should be italicized and whether each term should be capitalized.
• Check the use of punctuation (e.g., commas versus semicolons, the use of the period at the end).
• Some journals (e.g., IEEE ) provide a taxonomy of keywords. This aids in the classification of your research.

Introduction

This is the reader's first impression of your paper, so it should be clear and concise. Include relevant background information on your topic, using in-text citations as necessary. Report new developments in the field, and state how your research fills gaps in the existing research. Focus on the specific problem you are addressing, along with its possible solutions, and outline the limitations of your study. You can also include a research question, hypothesis, and/or objectives at the end of this section.

• Organize your information from broad to narrow (general to particular). However, don't start too broad; keep the information relevant.
• You can use in-text citations in this section to situate your research within the body of literature.

This is the part of your paper that explains how the research was done. You should relate your research procedures in a clear, logical order (i.e., the order in which you conducted the research) so that other researchers can reproduce your results. Simply refer to the established methods you used, but describe any procedures that are original to your study in more detail.

• Identify the specific instruments you used in your research by including the manufacturer’s name and location in parentheses.
• Stay consistent with the order in which information is presented (e.g., quantity, temperature, stirring speed, refrigeration period).

Now that you've explained how you gathered your research, you've got to report what you actually found. In this section, outline the main findings of your research. You need not include too many details, particularly if you are using tables and figures. While writing this section, be consistent and use the smallest number of words necessary to convey your statistics.

• Use appendices or supplementary materials if you have too much data.
• Use headings to help the reader follow along, particularly if your data are repetitive (but check whether your style guide allows you to use them).

In this section, you interpret your findings for the reader in relation to previous research and the literature as a whole. Present your general conclusions, including an assessment of the strengths and weaknesses of the research and the implications of your findings. Resolve the hypothesis and/or research question you identified in the introduction.

• Use in-text citations to support your discussion.
• Do not repeat the information you presented in the results or the introduction unless it is necessary for a discussion of the overall implications of the research.

This section is sometimes included in the last paragraph of the discussion. Explain how your research fits within your field of study, and identify areas for future research.

• Keep this section short.

Acknowledgments

Write a brief paragraph giving credit to any institution responsible for funding the study (e.g., through a fellowship or grant) and any individual(s) who contributed to the manuscript (e.g., technical advisors or editors).

• Check whether your journal uses standard identifiers for funding agencies (e.g., Elsevier's Funder Registry ).

Conflicts of Interest/Originality Statement

Some journals require a statement attesting that your research is original and that you have no conflicts of interest (i.e., ulterior motives or ways in which you could benefit from the publication of your research). This section only needs to be a sentence or two long.

Here you list citation information for each source you used (i.e., author names, date of publication, title of paper/chapter, title of journal/book, and publisher name and location). The list of references can be in alphabetical order (author–date style of citation) or in the order in which the sources are presented in the paper (numbered citations). Follow your style guide; if no guidelines are provided, choose a citation format and be consistent .

• While doing your final proofread, ensure that the reference list entries are consistent with the in-text citations (i.e., no missing or conflicting information).
• Many citation styles use a hanging indent and may be alphabetized. Use the styles in Microsoft Word to aid you in citation format.
• Use EndNote , Mendeley , Zotero , RefWorks , or another similar reference manager to create, store, and utilize bibliographic information.

Appendix/Supplementary Information

In this optional section, you can present nonessential information that further clarifies a point without burdening the body of the paper. That is, if you have too much data to fit in a (relatively) short research paper, move anything that's not essential to this section.

• Note that this section is uncommon in published papers. Before submission, check whether your journal allows for supplementary data, and don't put any essential information in this section.

Beyond IMRaD: Formatting the Details

Aside from the overall format of your paper, there are still other details to watch out for. The sections below cover how to present your terminology, equations, tables and figures, measurements, and statistics consistently based on the conventions of scientific writing.

Terminology

Stay consistent with the terms you use. Generally, short forms can be used once the full term has been introduced:

• full terms versus acronyms (e.g., deoxyribonucleic acid versus DNA);
• English names versus Greek letters (e.g., alpha versus α); and
• species names versus short forms (e.g., Staphylococcus aureus versus S. aureus ).

One way to ensure consistency is to use standard scientific terminology. You can refer to the following resources, but if you're not sure which guidelines are preferred, check with your target journal.

• For gene classification, use GeneCards , The Mouse Genome Informatics Database , and/or genenames.org .
• For chemical nomenclature, refer to the International Union of Pure and Applied Chemistry (IUPAC) Compendium of Chemical Terminology (the Gold Book ) and the  IUPAC–IUB Combined Commission on Biochemical Nomenclature .
• For marine species names, use the World Register of Marine Species (WoRMS) or the European Register of Marine Species (ERMS) .

Italics must be used correctly for scientific terminology. Here are a couple of formatting tips:

• Species names, which are usually in Greek or Latin, are italicized (e.g., Staphylococcus aureus ).
• Genes are italicized, but proteins aren't.

Whether in mathematical, scientific, or technical papers, equations follow a conventional format. Here are some tips for formatting your calculations:

• Number each equation you present in the text, inserting the number in parentheses.

X + Y = 1                                                                                                                                               (1)

• Check whether your target journal requires you to capitalize the word "Equation" or use parentheses for the equation number when you refer to equations within the text.

In Equation 1, X represents . . .

In equation (1), X represents . . .

(Note also that you should use italics for variables.)

• Try using MathType or Equation Editor in Microsoft Word to type your equations, but use Unicode characters when typing single variables or mathematical operators (e.g., x, ≥, or ±) in running text. This makes it easier to edit your text and format your equations before publication.
• In line with the above tip, remember to save your math equations as editable text and not as images in case changes need to be made before publication.

Tables and Figures

Do you have any tables, graphs, or images in your research? If so, you should become familiar with the rules for referring to tables and figures in your scientific paper. Some examples are presented below.

• Capitalize the titles of specific tables and figures when you refer to them in the text (e.g., "see Table 3"; "in Figure 4").
• In tables, stay consistent with the use of title case (i.e., Capitalizing Each Word) and sentence case (i.e., Capitalizing the first word).
• In figure captions, stay consistent with the use of punctuation, italics, and capitalization. For example:

Figure 1. Classification of author roles.

Figure 2: taxonomy of paper keywords

Measurements

Although every journal has slightly different formatting guidelines, most agree that the gold standard for units of measurement is the International System of Units (SI) . Wherever possible, use the SI. Here are some other tips for formatting units of measurement:

• Add spaces before units of measurement. For example, 2.5 mL not 2.5mL.
• Be consistent with your units of measure (especially date and time). For example, 3 hours or 3 h.

When presenting statistical information, you must provide enough specific information to accurately describe the relationships among your data. Nothing is more frustrating to a reviewer than vague sentences about a variable being significant without any supporting details. The author guidelines for the journal Nature recommend that the following be included for statistical testing: the name of each statistical analysis, along with its n value; an explanation of why the test was used and what is being compared; and the specific alpha levels and P values for each test.

Angel Borja, writing for Elsevier publications, described the statistical rules for article formatting as follows:

• Indicate the statistical tests used with all relevant parameters.
• Use mean and standard deviation to report normally distributed data.
• Use median and interpercentile range to report skewed data.
• For numbers, use two significant digits unless more precision is necessary.
• Never use percentages for very small samples.

Remember, you must be prepared to justify your findings and conclusions, and one of the best ways to do this is through factual accuracy and the acknowledgment of opposing interpretations, data, and/or points of view.

Even though you may not look forward to the process of formatting your research paper, it's important to present your findings clearly, consistently, and professionally. With the right paper format, your chances of publication increase, and your research will be more likely to make an impact in your field. Don't underestimate the details. They are the backbone of scientific writing and research.

One last tip: Before you submit your research, consider using our academic editing service for expert help with paper formatting, editing, and proofreading. We can tailor your paper to specific journal guidelines at your request.

Image source: 85Fifteen/ Unsplash.com

Let Us Format Your Paper to Your Target Journal’s Guidelines

Hire an expert academic editor , or get a free sample, about the author.

Joanna's passion for English literature (proven by her M.A. thesis on Jane Austen) is matched by her passion to help others with their writing (shown by her role as an in-house editor with Scribendi). She enjoys lively discussions about plot, character, and nerdy TV shows with her husband, and she loves singing almost as much as she loves reading. Isn't music another language after all?

Have You Read?

"The Complete Beginner's Guide to Academic Writing"

Related Posts

APA Style and APA Formatting

How to Research a Term Paper

How to Write a Thesis or Dissertation

Upload your file(s) so we can calculate your word count, or enter your word count manually.

We will also recommend a service based on the file(s) you upload.

English is not my first language. I need English editing and proofreading so that I sound like a native speaker.

I need to have my journal article, dissertation, or term paper edited and proofread, or I need help with an admissions essay or proposal.

I have a novel, manuscript, play, or ebook. I need editing, copy editing, proofreading, a critique of my work, or a query package.

I need editing and proofreading for my white papers, reports, manuals, press releases, marketing materials, and other business documents.

I need to have my essay, project, assignment, or term paper edited and proofread.

I want to sound professional and to get hired. I have a resume, letter, email, or personal document that I need to have edited and proofread.

 Prices include your personal % discount.

 Prices include % sales tax ( ).

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

• View all journals
• Explore content
• About the journal
• Publish with us
• Sign up for alerts

Formatting guide

This guide describes how to prepare contributions for submission. We recommend you read this in full if you have not previously submitted a contribution to Nature . We also recommend that, before submission, you familiarize yourself with Nature ’s style and content by reading the journal, either in print or online, particularly if you have not submitted to the journal recently.

Formats for Nature contributions

Articles are the main format for original research contributions to Nature . In addition, Nature publishes other submitted material as detailed below.

Articles are original reports whose conclusions represent a substantial advance in understanding of an important problem and have immediate, far-reaching implications. In print, physical sciences papers do not normally exceed 6 pages on average, and biological, clinical and social-sciences papers do not normally exceed 8 pages on average. However, the final print length is at the editor’s discretion.

Articles start with a fully referenced summary paragraph, ideally of no more than 200 words, which is separate from the main text and avoids numbers, abbreviations, acronyms or measurements unless essential. It is aimed at readers outside the discipline. This summary paragraph should be structured as follows: 2-3 sentences of basic-level introduction to the field; a brief account of the background and rationale of the work; a statement of the main conclusions (introduced by the phrase 'Here we show' or its equivalent); and finally, 2-3 sentences putting the main findings into general context so it is clear how the results described in the paper have moved the field forwards. Please refer to our annotated example   to see how the summary paragraph should be constructed.

The typical length of a 6-page article with 4 modest display items (figures and tables) is 2500 words (summary paragraph plus body text). The typical length of an 8-page article with 5-6 modest display items is 4300 words. A ‘modest’ display item is one that, with its legend, occupies about a quarter of a page (equivalent to ~270 words). If a composite figure (with several panels) needs to occupy at least half a page in order for all the elements to be visible, the text length may need to be reduced accordingly to accommodate such figures. Keep in mind that essential but technical details can be moved into the Methods or Supplementary Information.

As a guideline, articles typically have no more than 50 references. (There is no such constraint on any additional references associated with Methods or Supplementary Information.)

Sections are separated with subheadings to aid navigation. Subheadings may be up to 40 characters (including spaces).

Word counts refer to the text of the paper. Title, author list, acknowledgements and references are not included in total word counts.

Matters Arising and Corrections

Matters Arising are exceptionally interesting or important comments and clarifications on original research papers or other peer-reviewed material published within the past 18 months in Nature . They are published online but not in print.

For further details of and instructions for how to submit such comments on peer-reviewed material published in Nature — or to notify editors of the potential need for a correction — please consult our Matters Arising page.

Other contributions to Nature

Please access the other submitted material pages for further details on any of the contribution types below:

News and Comment

Correspondence

Books & Arts

News & Views

Insights, Reviews and Perspectives

Technology Features

The editorial process

See this section for an explanation of Nature 's editorial criteria for publication, refereeing policy and how editors handle papers after submission. Submission to a Nature journal is taken by the journal to mean that all the listed authors have agreed to all of the contents. See authorship policy for more details.

Presubmission enquiries

If you wish to enquire whether your Article might be suitable for consideration by Nature , please use our online presubmission enquiry service . All presubmission enquiries must include a cover paragraph to the editor stating the interest to a broad scientific readership, a fully referenced summary paragraph, and a reference list.

Readability

Nature is an international journal covering all the sciences. Contributions should therefore be written clearly and simply so that they are accessible to readers in other disciplines and to readers for whom English is not their first language. Thus, technical jargon should be avoided as far as possible and clearly explained where its use is unavoidable. Abbreviations, particularly those that are not standard, should also be kept to a minimum. The background, rationale and main conclusions of the study should be clearly explained. Titles and abstracts in particular should be written in language that will be readily intelligible to any scientist. Essential but specialized terms should be explained concisely but not didactically.

For gene, protein and other specialized names authors can use their preferred terminology so long as it is in current use by the community, but they must give all known names for the entity at first use in the paper. Nature prefers authors to use internationally agreed nomenclature. Papers containing new or revised formal taxonomic nomenclature for animals, whether living or extinct, are accepted conditional on the provision of LSIDs (Life Science Identifiers) by means of registration of such nomenclature with ZooBank, the proposed online registration system for the International Code of Zoological Nomenclature (ICZN).

Even though no paper will be rejected because of poor language, non–native English speakers occasionally receive feedback from editors and reviewers regarding language and grammar usage in their manuscripts. You may wish to consider asking colleagues to read your manuscript and/or to use a professional editing service such as those provided by our affiliates Nature Research Editing Service or American Journal Experts . You can also get a fast, free grammar check of your manuscript that takes into account all aspects of readability in English. Please note that the use of a language editing service is not a requirement for publication in Nature .

Nature 's editors provide detailed advice about the expected print length when asking for the final version of the manuscript. Nature 's editors often suggest revised titles and rewrite the summary paragraphs of Articles so the conclusions are clear to a broad readership.

After acceptance, Nature 's subeditors (copyeditors) ensure that the text and figures are readable and clear to those outside the field, and edit papers into Nature 's house style. They pay particular attention to summary paragraphs, overall clarity, figures, figure legends and titles.

Proofs are sent before publication; authors are welcome to discuss proposed changes with Nature 's subeditors, but Nature reserves the right to make the final decision about matters of style and the size of figures.

A useful set of articles providing general advice about writing and submitting scientific papers can be found on the SciDev.Net website.

Format of Articles

Contributions should be double-spaced and written in English (spellings as in the Oxford English Dictionary ).

Contributions should be organized in the sequence: title, authors, affiliations (plus present addresses), bold first paragraph, main text, main references, tables, figure legends, methods (including separate data and code availability statements), methods references, acknowledgements, author contributions, competing interest declaration, additional information (containing supplementary information line (if any) and corresponding author line), extended data figure/table legends. In order to facilitate the review process, for initial submissions we encourage authors to present the manuscript text and figures together in a single file (Microsoft Word or PDF, up to 30 MB in size). The figures may be inserted within the text at the appropriate positions or grouped at the end, and each figure legend should be presented together with its figure. Also, please include line numbers within the text.

Titles do not exceed two lines in print. This equates to 75 characters (including spaces). Titles do not normally include numbers, acronyms, abbreviations or punctuation. They should include sufficient detail for indexing purposes but be general enough for readers outside the field to appreciate what the paper is about.

An uninterrupted page of text contains about 1250 words.

A typical 6-page Article contains about 2,500 words of text and, additionally, 4 modest display items (figures and/or tables) with brief legends, reference list and online-only methods section if applicable. A composite figure (with several panels) usually needs to take about half a page, equivalent to about 600 words, in order for all the elements to be visible (see section 5.9 for instructions on sizing figures).

A typical 8-page Article contains about 4300 words of text and, additionally, 5-6 modest display items (figures and/or tables) with brief legends, reference list and online-only methods section if applicable. A composite figure (with several panels) usually needs to take about half a page, equivalent to about 600 words, in order for all the elements to be visible (see section 5.9 for instructions on sizing figures).

Authors of contributions that significantly exceed the limits stated here (or as specified by the editor) will have to shorten their papers before acceptance, inevitably delaying publication.

Nature requires authors to specify the contribution made by their co-authors in the end notes of the paper (see section 5.5). If authors regard it as essential to indicate that two or more co-authors are equal in status, they may be identified by an asterisk symbol with the caption ‘These authors contributed equally to this work’ immediately under the address list. If more than three co-authors are equal in status, this should be indicated in the author contributions statement. Present addresses appear immediately below the author list (below the footnote rule at the bottom of the first page) and may be identified by a dagger symbol; all other essential author-related explanation is placed in the acknowledgements.

Our preferred format for text is Microsoft Word, with the style tags removed.

TeX/LaTeX: If you have prepared your paper using TeX/LaTeX, we will need to convert this to Word after acceptance, before your paper can be typeset. All textual material of the paper (including references, tables, figure captions, online methods, etc.) should be included as a single .tex file.

We prefer the use of a ‘standard’ font, preferably 12-point Times New Roman. For mathematical symbols, Greek letters and other special characters, use normal text or Symbol font. Word Equation Editor/MathType should be used only for formulae that cannot be produced using normal text or Symbol font.

The ‘Methods’ section is in the main text file, following the figure legends. This Methods section will appear in the PDF and in the full-text (HTML) version of the paper online, but will not appear in the printed issue. The Methods section should be written as concisely as possible but should contain all elements necessary to allow interpretation and replication of the results. As a guideline, the Methods section does not typically exceed 3,000 words. To increase reproducibility, authors are encouraged to deposit a detailed description of protocols used in their study in a protocol sharing platform of their choice. Springer Nature’s protocols.io is a free and open service designed to help researchers share experimental know-how. Protocols deposited by the authors in www.protocols.io will be linked to the online Methods section upon publication

Detailed descriptions of methods already published should be avoided; a reference number can be provided to save space, with any new addition or variation stated.

The Methods section should be subdivided by short bold headings referring to methods used and we encourage the inclusion of specific subsections for statistics, reagents and animal models. If further references are included in this section their numbering should continue from the end of the last reference number in the rest of the paper and they are listed after the Methods section.

Please provide separate Data Availability and Code Availability statements after the main text statements and before the Extended Data legends; detailed guidance can be found in our data availability and data citations policy . Certain data types must be deposited in an appropriate public structured data depository (details are available here ), and the accession number(s) provided in the manuscript. Full access is required at the time of publication. Should full access to data be required for peer review, authors must provide it.

The Methods section cannot contain figures or tables (essential display items should be included in the Extended Data or exceptionally in the Supplementary Information).

References are each numbered, ordered sequentially as they appear in the text, tables, boxes, figure legends, Methods, Extended Data tables and Extended Data figure legends.

When cited in the text, reference numbers are superscript, not in brackets unless they are likely to be confused with a superscript number.

Do not use linked fields (produced by EndNote and similar programs). Please use the one-click button provided by EndNote to remove EndNote codes before saving your file.

As a guideline, Articles allow up to 50 references in the main text if needed and within the average page budget. Only one publication can be listed for each number. Additional references for Methods or Supplementary Information are not included in this count.

Only articles that have been published or accepted by a named publication, or that have been uploaded to a recognized preprint server (for example, arXiv, bioRxiv), should be in the reference list; papers in preparation should be mentioned in the text with a list of authors (or initials if any of the authors are co-authors of the present contribution).

Published conference abstracts, numbered patents, preprints on recognized servers, papers in press, and research datasets that have been assigned a digital object identifier may be included in reference lists, but text, grant details and acknowledgements may not. (An exception is the highlighted references which we ask authors of Reviews, Perspectives and Insights articles to provide.)

All authors should be included in reference lists unless there are more than five, in which case only the first author should be given, followed by ‘et al.’.

Please follow the style below in the published edition of Nature in preparing reference lists.

Authors should be listed surname first, followed by a comma and initials of given names.

Titles of all cited articles are required. Titles of articles cited in reference lists should be in upright, not italic text; the first word of the title is capitalized, the title written exactly as it appears in the work cited, ending with a full stop. Book titles are italic with all main words capitalized. Journal titles are italic and abbreviated according to common usage. Volume numbers are bold. The publisher and city of publication are required for books cited. (Refer to published papers in Nature for details.)

Research datasets may be cited in the reference list if they have been assigned digital object identifiers (DOIs) and include authors, title, publisher (repository name), identifier (DOI expressed as a URL). Example: Hao, Z., AghaKouchak, A., Nakhjiri, N. & Farahmand, A. Global Integrated Drought Monitoring and Prediction System (GIDMaPS) data sets. figshare http://dx.doi.org/10.6084/m9.figshare.853801 (2014).

Recognized preprints may be cited in the reference list. Example: Babichev, S. A., Ries, J. & Lvovsky, A. I. Quantum scissors: teleportation of single-mode optical states by means of a nonlocal single photon. Preprint at http://arXiv.org/quant-ph/0208066 (2002).

References to web-only journals should give authors, article title and journal name as above, followed by URL in full - or DOI if known - and the year of publication in parentheses.

References to websites should give authors if known, title of cited page, URL in full, and year of posting in parentheses.

End notes are brief and follow the Methods (or Methods References, if any).

Acknowledgements should be brief, and should not include thanks to anonymous referees and editors, inessential words, or effusive comments. A person can be thanked for assistance, not “excellent” assistance, or for comments, not “insightful” comments, for example. Acknowledgements can contain grant and contribution numbers.

Author Contributions: Authors are required to include a statement to specify the contributions of each co-author. The statement can be up to several sentences long, describing the tasks of individual authors referred to by their initials. See the authorship policy page for further explanation and examples.

Competing interests  statement.

Additional Information: Authors should include a set of statements at the end of the paper, in the following order:

Papers containing Supplementary Information contain the statement: “Supplementary Information is available for this paper.”

A sentence reading "Correspondence and requests for materials should be addressed to XX.” Nature expects this identified author to respond to readers’ enquiries and requests for materials, and to coordinate the handling of any other matters arising from the published contribution, including corrections complaints. The author named as corresponding author is not necessarily the senior author, and publication of this author’s name does not imply seniority. Authors may include more than one e-mail address if essential, in which event Nature will communicate with the first-listed address for any post-publication matters, and expect that author to coordinate with the other co-authors.

Peer review information includes the names of reviewers who agree to be cited and is completed by Nature staff during proofing.

A sentence reading “Reprints and permissions information is available at www.nature.com/reprints.”

Life sciences and behavioural & social sciences reporting guidelines

To improve the transparency of reporting and the reproducibility of published results, authors of life sciences and behavioural & social sciences Articles must provide a completed Reporting Summary that will be made available to editors and reviewers during manuscript assessment. The Reporting Summary will be published with all accepted manuscripts.

Please note: because of the advanced features used in these forms, you must use Adobe Reader to open the documents and fill them out.

Guidance and resources related to the use and reporting of statistics are available here .

Tables should each be presented on a separate page, portrait (not landscape) orientation, and upright on the page, not sideways.

Tables have a short, one-line title in bold text. Tables should be as small as possible. Bear in mind the size of a Nature page as a limiting factor when compiling a table.

Symbols and abbreviations are defined immediately below the table, followed by essential descriptive material as briefly as possible, all in double-spaced text.

Standard table formats are available for submissions of cryo-EM , NMR and X-ray crystallography data . Authors providing these data must use these standard tables and include them as Extended Data.

Figure legends

For initial submissions, we encourage authors to present the manuscript text and figures together in a single Word doc or PDF file, and for each figure legend to be presented together with its figure. However, when preparing the final paper to be accepted, we require figure legends to be listed one after the other, as part of the text document, separate from the figure files, and after the main reference list.

Each figure legend should begin with a brief title for the whole figure and continue with a short description of each panel and the symbols used. If the paper contains a Methods section, legends should not contain any details of methods. Legends should be fewer than 300 words each.

All error bars and statistics must be defined in the figure legend, as discussed above.

Nature requires figures in electronic format. Please ensure that all digital images comply with the Nature journals’ policy on image integrity .

Figures should be as small and simple as is compatible with clarity. The goal is for figures to be comprehensible to readers in other or related disciplines, and to assist their understanding of the paper. Unnecessary figures and parts (panels) of figures should be avoided: data presented in small tables or histograms, for instance, can generally be stated briefly in the text instead. Avoid unnecessary complexity, colouring and excessive detail.

Figures should not contain more than one panel unless the parts are logically connected; each panel of a multipart figure should be sized so that the whole figure can be reduced by the same amount and reproduced on the printed page at the smallest size at which essential details are visible. For guidance, Nature ’s standard figure sizes are 90 mm (single column) and 180 mm (double column) and the full depth of the page is 170 mm.

Amino-acid sequences should be printed in Courier (or other monospaced) font using the one-letter code in lines of 50 or 100 characters.

Authors describing chemical structures should use the Nature Research Chemical Structures style guide .

Some brief guidance for figure preparation:

Lettering in figures (labelling of axes and so on) should be in lower-case type, with the first letter capitalized and no full stop.

Units should have a single space between the number and the unit, and follow SI nomenclature or the nomenclature common to a particular field. Thousands should be separated by commas (1,000). Unusual units or abbreviations are defined in the legend.

Scale bars should be used rather than magnification factors.

Layering type directly over shaded or textured areas and using reversed type (white lettering on a coloured background) should be avoided where possible.

Where possible, text, including keys to symbols, should be provided in the legend rather than on the figure itself.

Figure quality

At initial submission, figures should be at good enough quality to be assessed by referees, preferably incorporated into the manuscript text in a single Word doc or PDF, although figures can be supplied separately as JPEGs if authors are unable to include them with the text. Authors are advised to follow the initial and revised submissions guidelines with respect to sizing, resolution and labelling.

Please note that print-publication quality figures are large and it is not helpful to upload them at the submission stage. Authors will be asked for high-quality figures when they are asked to submit the final version of their article for publication.At that stage, please prepare figures according to these guidelines .

Third party rights

Nature discourages the use or adaptation of previously published display items (for example, figures, tables, images, videos or text boxes). However, we recognize that to illustrate some concepts the use of published data is required and the reuse of previously published display items may be necessary. Please note that in these instances we might not be able to obtain the necessary rights for some images to be reused (as is, or adapted versions) in our articles. In such cases, we will contact you to discuss the sourcing of alternative material.

Figure costs

In order to help cover some of the additional cost of four-colour reproduction, Nature Portfolio charges our authors a fee for the printing of their colour figures. Please contact our offices for exact pricing and details. Inability to pay this charge will not prevent publication of colour figures judged essential by the editors, but this must be agreed with the editor prior to acceptance.

Production-quality figures

When a manuscript is accepted in principle for publication, the editor will ask for high-resolution figures. Do not submit publication-quality figures until asked to do so by an editor. At that stage, please prepare figures according to these guidelines .

Extended Data

Extended Data figures and tables are online-only (appearing in the online PDF and full-text HTML version of the paper), peer-reviewed display items that provide essential background to the Article but are not included in the printed version of the paper due to space constraints or being of interest only to a few specialists. A maximum of ten Extended Data display items (figures and tables) is typically permitted. See Composition of a Nature research paper .

Extended Data tables should be formatted along similar lines to tables appearing in print (see section 5.7) but the main body (excluding title and legend, which should be included at the end of the Word file) should be submitted separately as an image rather than as an editable format in Word, as Extended Data tables are not edited by Nature’s subediting department. Small tables may also be included as sub-panels within Extended Data figures. See Extended Data Formatting Guide .

Extended Data figures should be prepared along slightly different guidelines compared to figures appearing in print, and may be multi-panelled as long as they fit to size rules (see Extended Data Formatting Guide ). Extended Data figures are not edited or styled by Nature’s art department; for this reason, authors are requested to follow Nature style as closely as possible when preparing these figures. The legends for Extended Data figures should be prepared as for print figures and should be listed one after the other at the end of the Word file.

If space allows, Nature encourages authors to include a simple schematic, as a panel in an Extended Data figure, that summarizes the main finding of the paper, where appropriate (for example, to assist understanding of complex detail in cell, structural and molecular biology disciplines).

If a manuscript has Extended Data figures or tables, authors are asked to refer to discrete items at an appropriate place in the main text (for example, Extended Data Fig. 1 and Extended Data Table 1).

If further references are included in the Extended Data tables and Extended Data figure legends, the numbering should continue from the end of the last reference number in the main paper (or from the last reference number in the additional Methods section if present) and the list should be added to the end of the list accompanying the additional Methods section, if present, or added below the Extended Data legends if no additional Methods section is present.

Supplementary Information

Supplementary Information (SI) is online-only, peer-reviewed material that is essential background to the Article (for example, large data sets, methods, calculations), but which is too large or impractical, or of interest only to a few specialists, to justify inclusion in the printed version of the paper. See the Supplementary Information page for further details.

Supplementary Information should not contain figures (any figures additional to those appearing in print should be formatted as Extended Data figures). Tables may be included in Supplementary Information, but only if they are unsuitable for formatting as Extended Data tables (for example, tables containing large data sets or raw data that are best suited to Excel files).

If a manuscript has accompanying SI, either at submission or in response to an editor’s letter that requests it, authors are asked to refer to discrete items of the SI (for example, videos, tables) at an appropriate point in the main manuscript.

Chemical structures and characterization of chemical materials

For guidelines describing Nature ’s standards for experimental methods and the characterization of new compounds, please see the information sheet on the characterization of chemical materials .

We aim to produce chemical structures in a consistent format throughout our articles. Please use the Nature Portfolio Chemical Structures Guide and ChemDraw template to ensure that you prepare your figures in a format that will require minimal changes by our art and production teams. Submit final files at 100% as .cdx files.

Registered Reports

Registered Reports are empirical articles testing confirmatory hypotheses in which the methods and proposed analyses are pre-registered and peer reviewed prior to research being conducted. For further details about Registered Reports and instructions for how to submit such articles to Nature please consult our Registered Reports page.

All contributions should be submitted online , unless otherwise instructed by the editors. Please be sure to read the information on what to include in your cover letter as well as several important content-related issues when putting a submission together.

Before submitting, all contributors must agree to all of Nature's publication policies .

Nature authors must make data and materials publicly available upon publication. This includes deposition of data into the relevant databases and arranging for them to be publicly released by the online publication date (not after). A description of our initiative to improve the transparency and the reproducibility of published results is available here . A full description of Nature’s publication policies is at the Nature Portfolio Authors and Referees website .

Other Nature Research journals

An account of the relationship between all the Nature journals is provided at the Nature family page . 

Quick links

• Explore articles by subject
• Guide to authors
• Editorial policies